K&F Concept Nikon F Lens Mount to Fuji X Camera Body Adapter Ring, matte lacquer, NIK-FX FIT ART
SKU: KF06.512
What can I say great, the adapter just fully meets the expectations. I own a few adapters from K&F Concept and this fits in seamlessly in terms of accuracy of fit and workmanship. I can only recommend.
03/06/2023
Looks great with the lens and camera. Good secure fit. I had read that the aperture ring sometimes sits too close on some mounts and is awkward to rotate, but my copy of the lens works absolutely fine with this mount. Haven't tried it with other Konica Hexanon lenses to know how it works, but so far so good. Very happy.
03/06/2023
This K&F Concept adapter is well made and fits my relatively heavy Zeiss zoom lens and my Fuji XT1 which provides the stabilization I was hoping for. worth the extra cost over cheaper adapters to gain that trust. Like other third-party adapters, this adapter requires manual focusing.
02/06/2023
The adapter does what it says 0 problems... On arrival the m42 mount was misaligned but this is easily remedied by loosening the 4 screws on the side and turning into position. But even if you don't, the adapter will work just fine.
01/06/2023
I didn't know the K&F Concept brand, but I recently read a positive review about their adapters. I already use Quenox and K&F adapters (also good quality) and wanted to try this brand. -Coupling with lens: tight but good -Coupling with body: perfect -Infinite focus: good -Light tight: not measured -Material and workmanship: good -Operating aperture on G lens: good -Coupling with pre-AI lens: good -Price /Quality: good In short, great product!
01/06/2023
Works as intended. This is an easy game when mounted on the camera body (Fujifilm X-t3)
31/05/2023
Purchased to use Sigma 50mm macro, Nikon mount, on my XT3. After some uncertainty by pairing the adapter to the lens (instead it fits the camera body perfectly) I have to say that I am completely satisfied. The optics maintain good quality in both photos and videos. It also looks well built so I hope it lasts a long time.
31/05/2023
K&F is the best lens adapter manufacturer in terms of value for money. Compared to the original version, these are much lighter and have an attractive exterior finish. The inside is well flocked and doesn't shine like other cheap Fotga or Fotasy adapters. Compared to the third generation, the build is about the same, but the newer ones work and look much better. I never understood the flat, square look of the Gen 3. I would choose these adapters over any other brand.
30/05/2023
Good workmanship and finish. A little too much resistance to mount the lenses on the adapter (especially the old AIS, while it's softer on the DX series with plastic mount). Perfect attachment to the camera. Good drawing accuracy: When focusing on infinity, the focus is the same as the focus. WARNING: This adapter is only suitable for optics (AI or AIS) as the adapter does not allow adjustment of the iris in type G lenses without an iris ring. Other adapters also allow the diaphragms to be adjusted on G-type lenses, even if they do not allow a shutter with constant 1-stop variations.
30/05/2023