The lens adapter is very well made and has hardly any play as other adapters are reported to have. The tripod mount is fixed to the adapter, not interchangeable like the original, but this also brings better stability, so from my point of view, better than the original. Focusing and aperture control works perfectly.
27/05/2023
The adapter fits the Canon M3, so I can use the old systems. Data transmission is also there, everything is great. I was advised against by the specialist dealer, but of course there are huge price differences. As a hobby clipper, this version is sufficient for me. I am completely satisfied
26/05/2023
If the crush ring is not attached in the Lock position, the aperture blade will not move in the Open position. The EOS M-mount adapter is built better than the SONY E-mount adapter with just the narrower pin (laughs), but despite the fact that the body is too small, the lens weighs quite a bit. So if it is not an adapter with a tripod seat, the mount and the camera screw will be put under enormous stress. Most importantly, FD adapters don't require any tools, and there are few things that detach the tripod seat, so that's an issue.
26/05/2023
The adapter works very well and all lenses from wide angle to tele and tamron to sigma worked with the camera without any problems. I even found the Canon EOS M's sluggish autofocus to be a little quicker. Now I can use my Canon 60D and the EOS M together without having to change lenses every time. Clear purchase recommendation.
25/05/2023
I can reuse my FDs!!! With the EOS FF and APSC that wasn't possible except with adapters that didn't allow for infinity focus and with a lens that spoiled the goodness of the optics. Thanks to this adapter, everything works great on the EOS M (I have an M6). Obviously in the manual.
25/05/2023
I have an old Canon 550D and some Lens. And now I've bought a Canon eos m100. I want to keep using my EF Lens. Then I buy adapters. This works perfectly and can autofocus very quickly.
24/05/2023
Works perfectly, Canon fd 50mm f1.8 and Vivitar Series 1 70-210 f3.5 come alive again on the mirrorless Canon M5. Really happy with it!!!
24/05/2023
I bought the adapter for the M50 so that I can use all EF and EF S lenses. Especially on the EF S 10-18mm everything works great. The adapter makes a very valuable impression and does what it is supposed to do.
23/05/2023
can use it with no problems. I think the processing accuracy is high. I was surprised at how it looked on the FD lens, which is quite old.
23/05/2023
wasn't expecting much but I bought the EOS-M5 for the M42 mount and the FD at the same time. Now that I'm sick of the M lenses, I could use my old favorite lens and I had fun releasing the EOS-M5. Compared to the M42 mount, the FD can be locked and opened (checking with the new FD, with the old FD?) So there's no problem aligning the pins with the opening and then shrinking the aperture. Having previously set the aperture, set the switch pin to OPEN, switch to LOCK and release the shutter button. It is easy to use and FDs have come into play frequently. The construction was better than expected and there are infinite points so there are no complaints, but if I had to express my wishes it would have been nice if it was a little thinner without being bulky.
22/05/2023