Dimensionally stable backpack bag, which is not only of good quality at first glance. This means that all seams are clean and neatly finished. The zippers are also neatly sewn in and can be easily opened and closed without any problems. On the inside there are 2 large and 3 small partitions as well as a partition between the main and top compartment, which can be placed in different positions - depending on your needs - using Velcro devices. This means you can adapt the interior of the backpack perfectly to your camera equipment. These dividers are well padded and offer sufficient protection. The backpack also includes a separate and padded laptop compartment. This is also closed with the help of a generous Velcro fastener. Four smaller open inner compartments in the upper area, two small lockable compartments for e.g. SD cards in the main compartment, a side "quick access compartment", two straps as a stop aid for completely unfolding, another front compartment with a zip and an open side pocket with elastic band, a removable key ring, A strap for attaching the suitcase and a rain cover complete the equipment. Overall, this backpack makes a very high-quality and stable impression. It has a large storage volume, but due to its slightly narrower shape it does not appear bulky and is visually very pleasing. The padded shoulder straps make it comfortable to wear. Of course, the application is not limited to transporting photo equipment. It can also be used very well, for example as a school, university, laptop or travel backpack. By removing the inner room dividers, you get a large inner compartment and thanks to the water-repellent material, all items are well protected from moisture. This is also ensured by the internal overlaps under the zipper and the easy-to-close zippers, so you can be sure that moisture stays out.