Got this K&F concept battery to use on my Canon R6 rig with the Smallrig tiltable Vmount bracket, and it's an awesome addition to my rig.

Adding a Vmount to your rig increases the weight tremendously but can also help reduce some hassle, especially, if like me, you are using a monitor as well. My monitor is an OSEE T5, and it likes to absolutely chew through the Sony NPF style batteries, so I'm always changing them like twice on shooting days. With this Vmount battery, I can plug in a usbc-to-usb micro cable, and power the screen off it for the entire day no problem.

I have one other Vmount battery, and this K&F has some big advantages. One, it's smaller than the competitor in every dimension, which is great for cuttings some bulk. Two, the screen is much more useful and provides pretty much the easiest way to tell how long its going to last - a run time meter! This is so awesome and being new to v-mount, I didn't even know it existed. On the screen of the K&F, you can see both USB port voltages, the battery voltage and bars%, as well as the current runtime for the output you are using. I have not used this to power my camera or other accessories quite yet, but seeing that number is incredibly useful.

One complaint, which might be a USB restriction, is that my display refuses to work on a USBA-to micro cable. I'm not sure if this is because USBA can't resolve above 5v or what, but I have to use a C-to-micro. PD on the USB C port works as expected, and is very useful because to power an R6, you have to use that. Unfortunately with my current cable set, my display cable blocks my USB port on my camera, so I wasn't able to power both the camera and screen at the same time, but I'm sure that's possible with a cable change.

Overall for the price of this battery, it's awesome. I would say that you should refrain from dropping it, as you should with most camera gear, but the plastic on it does not feel super thick. The vmount has a plastic plate where it contacts the receiving end, and feels just fine. It's attached with 3 screws so if you do break it somehow, it could theoretically be replaced.

Charging this over USBC works fine and charges the battery up in some amount of time (I always charge the night before shoots so I don't really care). If you look at the screen while charging, it does actually show that the voltage resolves to 20v, so make sure you are using a PD-compatible charger to get maximum charging speed.

An absolute gem with the latest and innovative technology. It's the best security camera I have that is completely wireless, self-sufficient and has a solar panel to charge the battery so I don't have to take it off to charge every 2 months. What a lovely design as the plastic used for this unit is a high quality material and it comes with all the hardware including a paper template for drilling holes to ensure a perfect installation. It also comes with an extra USB cable just in case you need to charge it with a USB charger, but my camera arrived 100% charged showing no battery drain when it's off and the battery does not discharge itself. What I love most is that it has a fully motorized head, so you can use your phone to pan your head in all directions to check what's going on outside. I am very impressed with this feature as all 4 security cameras I have are only fixed in one direction so you can only see in one direction. So I had 2 cameras in the front and one on the back and side of the house. This one camera will cover the front and/or back of my entire house. No waste of expensive electricity either, as it is completely self-sufficient in power thanks to the included solar panel, which doubles as a shield or canopy to protect it from harsh weather. The only thing missing from this pack is a Micro SD/TIFF card and you're good to go. Very easy and uncomplicated installation. Just make sure your router is set to 2.4 wireless protocol during installation. *PS I did not receive an SD card or a SIM card specified in the description. I am very impressed with the design and functionality of this high quality wireless and solar powered camera from K&F Concept. I would give 10 stars

What an incredible battery! Whether it's to power your camera... a small LED light (I used it on a USB-C folding panel, nickel) or any accessory on a shoot (of course it charges a phone) it works really well! K&F becomes a real reference in this field

This battery is a marvel! I do a lot of professional video shooting and the shots that need to be taken are - very often - far from power sources... So I plug my camera into a fake D-TAP battery, my lighting back-up etc... This battery has not one, but two D-TAP outputs, a PB interface, a USB-C port (PD Fast Charge) and a USB-A port. In short, everything you need for mobility and of course a V-Mount attachment to put it on standard supports. So it doesn't have a very small format if we compare it to classic power banks for the same capacity but on a camera it fits perfectly (and it's not exactly the same use). It makes my shooting so much easier that even when I have access to power, I use the battery to avoid running cables. I knew K&F Concept well for the quality of its photo filters, but the same care is given to this battery.

I've been using the camera for a few weeks now and I'm quite satisfied. The solar panel supplies the battery with enough power. In my case, the solar panel is not exposed directly to the sun or only for a short time and the battery is still 100%.

The image quality is sufficient and the night vision is good for 2-3m. The motion detection works, but could trigger a little faster.

Unfortunately, the management of the recordings only works via the CloudEge app. Therefore, the camera cannot be integrated into any other systems. Anyone who can live with that and has no power supply available at the camera location is well served with the camera.

The K&F Concept KF50.0009AEU is an outdoor surveillance camera with full control via wireless connection. It is powered by an internal lithium battery that can be charged with the included solar panel. The lens mount is motorized and allows remote control of horizontal and vertical movements as well as zooming in and out.
The integrated power source provides some independence in camera location. I placed our sample on a post in the backyard, fairly high up, pointing at the lawn to record wildlife, especially at night. The plastic mount is easily attached with the screws provided. Masonry requires the use of a drill and dowels (preferably better than the cheap examples in the kit). I mounted the solar panel under the camera in a similar fashion, using the pivoting mount to adjust it so that it points slightly upward to harvest as much sunlight as possible. It could be placed away from the camera. The 3-meter tether offers a lot of flexibility in this regard. It plugs into a USB-C socket underneath the device. An alternative power source could possibly be used if sunlight is scarce, but the body of the plug is a bit too small and the socket is surrounded by rubber to keep moisture out, so a suitable cord is needed.
Before all this, the first task is to connect the camera to the home WLAN and download the Ubox app to a smartphone. It's pretty standard for this type of device. I would have liked to use the camera via PC, but it doesn't support Windows. The only option is to use the Android app in an emulator, or possibly use a Windows program with multiple factory cameras. This requires some knowledge and effort, and the camera may need to be set up in the manufacturer's app first to get the necessary details.
The camera can be set up with either a sound signal or a QR code. I had trouble with the former, but the QR code worked right away. The instruction book clearly made some effort, but some of the English language is difficult to follow.
The camera has all the typical features listed. The app is fairly easy to navigate, but not perfect. Recordings can be viewed after a short connection delay. They can be stored on an SD card in the camera or in the cloud (subscription required after the free trial). The recording quality is very satisfactory, and I found this camera generally capable. I'm still trying to set up shots longer than a few seconds, and the battery doesn't last the night at this time of year. It might be better on a safety setting where it's not triggered and not accessed as often.

This wireless outdoor surveillance camera works where Wi-Fi and power are not available. With a NANO SIM card, the camera is only activated when it has detected a moving object. This reduces data consumption.
The schedule function (UBox APP ) activates the camera only when needed and saves unnecessary notifications.
With an SD memory card, you can bypass the paid cloud usage.

An absolute gem with the latest and innovative technology. It is the best security camera I have that is completely wireless, self contained and has a solar panel to charge the battery so I don't have to take it off every 2 months to recharge.

What a nice design as the plastic used for this unit is a high quality material and comes with all the hardware, including a paper template for drilling holes to ensure a perfect installation. It also comes with an extra USB cable just in case you need to charge it with a USB charger, but my camera was 100% charged when it arrived, which shows that when it's off, there's no battery drain and it doesn't self-discharge.

What I love most is that it has a fully motorized head, so you can pan the head in all directions with your phone to check what's going on outside. I am very impressed with this feature because all 4 of the security cameras I have are only mounted in one direction, so you can only see in one direction. So I had 2 cameras in the front and one in the back and side of the house. This one camera will cover my whole house front and/or back. No waste of expensive electricity either, as it is completely self-sufficient in power thanks to the solar panel that comes with it, which also protects it from harsh weather as a shield or canopy.

The only thing missing from this package is a Micro SD/TIFF card and you're good to go. Very simple and straightforward installation. Just make sure your router is set to 2.4 wireless protocol during installation.

*PS I did not receive an SD card or a SIM card specified in the description.

I am very impressed with the design and functionality of this high quality wireless and solar power camera from K&F Concept. I would give 10 stars if possible. Buy with confidence.