We've been having some water leaking issues in one of our bathrooms. I got the inspection cam so that I could see underneath the vanity and the hoses where my water is connected at the sink site. The endoscope works pretty well. It has a nice sturdy case and the camera head is metal, feels very well build. The camera has a long cord and it's easy to get to the hard to reach places. The only thing I wish was a little better is it can't save photos and videos, sometimes I need to review the problem after the inspection. Overall, it is a nice borescope.

We've been having some water leaking issues in one of our bathrooms. I got the inspection cam so that I could see underneath the vanity and the hoses where my water is connected at the sink site. The endoscope works pretty well. It has a nice sturdy case and the camera head is metal, feels very well build. The camera has a long cord and it's easy to get to the hard to reach places. The only thing I wish was a little better is it can't save photos and videos, sometimes I need to review the problem after the inspection. Overall, it is a nice borescope.

If you're looking for a good all round inspection camera this is it....
I purchased this with specific task in mind:
1. Plumbing inspection and leak detection especially when the drain is clogged...
2. Automotive and light duty Truck repair - used it to do visual inspection inside cylinders on diesel engine valve, cylinder walls and piston.. I used it to locate hidden bolts while changing out cam driven distributor on 1994 Toyota Camry..
3. Home HVAC inspection on evaporator, condenser, and supply side air registers.

I am retired and no I am not a professional.. just like fixing things and the K&F Concept Inspection Camera is soooo much better than using an inspection mirror and a flash light....plus you don't have to climb over or under things to do inspections....My wife uses it to find things that she has dropped behind the washing machine, dryer or the stove...

This inspection camera was ordered to inspect a sealing membrane in a house with timber frame construction as a homeowner accompanying a renovation. The image looks sharp on the display and the camera has a sufficient refresh rate for orientation. Noise is tolerable in low light, but almost imperceptible in full light. The side camera is only sharp in the close-up range, but it is still very helpful for the rough exploration of cavities, because you can dive into a borehole and get an all-round view without having to turn the camera head around the corner. The line can be easily modeled and remains easily routed over a distance of approx. 1 meter. This has proven useful in getting the camera free again, if you want to look behind an edge at some distance with a bent end. The long line is also helpful to form a kind of crank outside the hole in order to be able to guide the camera better.
I can't see any reduction in image quality in the photos after I've scaled them down to 50% as a test. I therefore suspect that the usable resolution is well below the specified 1080P. I haven't tried the accessories like the magnet, but the protective ring for the accessory thread sometimes gets in the way when pulling the camera back. A clear purchase recommendation for occasional use.

I will have to say I am very happy so far. I am been wanting an inspection scope for some time and I have a condensation drain line issue that I am dealing with and pulled the trigger. It is allowing me to see areas that I previous could not and has been very usual so far. Now, I don't think it will bend through a 90 turn, but the side camera allowed me to view that segment.I think the quality is pretty amazing and the price is right. Not too cheap and not very expensive.I hope this will last for years and I can see myself using for many things. I actually already used it to look in the sump area of my aquarium to find seething that I had dropped in it. I found it and was able to retrieve - just a little bonus.

price and quality are in line because you definitely get what you pay for so this is a great addition to my camera.

Quality best inspection camera I ever own.

This inspection camera was ordered to inspect a sealing sheet in a house with timber frame construction as a homeowner accompanying a renovation. The image looks sharp on the display and the camera has a sufficient refresh rate for orientation. Noise is tolerable in low light, but almost imperceptible in full light. The side camera is only sharp in the close-up range, but it is still very helpful for roughly exploring cavities, because you can dive into a borehole and get an all-round view without having to turn the camera head around the corner. The line can be easily modeled and remains easily routed over a distance of approx. 1 meter. This has proved beneficial in getting the camera free again, if you want to look behind an edge at some distance with a bent end. The long line is also helpful to form a kind of crank outside the hole in order to be able to guide the camera better.
I can't see any reduction in image quality in the photos after I've scaled them down to 50% as a test. I therefore suspect that the usable resolution is well below the specified 1080P. I haven't tried the accessories like the magnet, but the protective ring for the accessory thread sometimes gets in the way when pulling the camera back. A clear purchase recommendation for occasional use.