The complete small set arrives in a small neutral box. In addition to the basic tripod, there is a small bag made of a kind of Oxford material with which you can transport the tripod. A small plastic bag also contains a small Bluetooth trigger with the associated strap and a screw-on holder for the smartphone. A user manual for the tripod in English and Chinese as well as a small manual for the Bluetooth trigger complete the picture. The basic tripod weighs around 890 g without attachments, which is quite light for such a tripod. When folded up optimally, you reach a length of around 32 cm and a diameter of about 10cm. Ideal to take with you on hikes or excursions. The three legs can be folded down in three stages (approx. 30°, 45° and almost 90°). In this way, a minimum height of around 35cm can be achieved. The legs have three extensions that can be pulled out and locked in place. So you can balance the tripod very well on sloping and uneven floors. A small spirit level on the tripod would have been ideal for this, but unfortunately it was not used. The rubber foot must be turned to the left, then all three extensions are released and can be adjusted. The set length is locked by turning it briefly to the right. However, the structure of the legs and the lock is kept quite simple and does not make a very stable impression. During the test, it happened to me again and again that a segment or even a whole leg pushed itself back in. If you pull out the three legs fully and spread them slightly, you will reach a height of around 107cm. The middle rod can also be set in three positions. Locking and releasing also works as with the tripod legs. If the middle rail is also fully extended, you get a maximum height of around 168cm, which is quite impressive for such a small tripod. When fully extended, however, the low weight becomes noticeable, the tripod is not very stable and tends to wobble slightly, especially in strong winds. It is therefore not suitable for long exposures. To attach a camera or lighting fixture, the tripod has a simple ball head that can be continuously tilted up to 90°. Compact cameras, small bridge cameras or at most one small system camera can be easily and securely mounted on it, heavier cameras such as DSLR or video cameras are definitely too heavy for the system. If you loosen the lower cover on the center drive, the middle rod can be removed and used as a selfie stick or small monopod A smartphone can also be attached using the included adapter. This can be mounted either horizontally or upright, for which two tripod threads are available on the adapter. The mobile phone is attached by spring action, the retaining clips are rubberized. A minimum of 6 cm and a maximum of almost 9.5 cm width can be inserted as a smartphone. The shutter release provided is also intended for use with the smartphone. Using Bluetooth, it can be easily integrated into a mobile phone as an input device. The two applied triggers are labeled Camera 360 - IOS and Android, but both buttons have the same function. With my cell phone, the shutter release didn't work at first, only the zoom was activated. After trying out the camera settings, I found the culprit. You had to switch the function of the volume buttons from zoom to shutter, then it worked without any problems. Conclusion: A small, light universal tripod for small mobile technology. From around 35cm to almost 170cm, practically all heights are possible. It is very well suited for light lighting equipment, small cameras or mobile phones. Tripod, lighting stand, selfie stick, etc. are just a few areas of application. I would not recommend it for larger and, above all, heavier DSLR cameras or video cameras due to the low tripod weight and, above all, the not quite optimal locking. The last known price was €45, which is definitely justified for this little universal genius. Due to the not optimal locking, I award a good 4 stars.

The K&F Concept Magnetic Variable ND Filter offers a convenient way to control light for smartphone photography. While it has some strengths, it also comes with a few limitations.

Key Features:

Magnetic Convenience: The magnetic attachment system makes it quick and easy to apply and remove the filter.
Variable ND Range: The ND2-32 filter provides a decent range of light reduction for various shooting conditions.
Phone Compatibility: Designed to work with popular iPhone models, offering versatility for smartphone photographers.
Room for Improvement:

Image Quality Concerns: Some users have reported noticeable image quality issues, such as color shifts or vignetting, especially at the filter's extremes.
Filter Thickness: The filter adds bulk to your phone setup, which can be inconvenient for some users.

Overall:

The K&F Concept Magnetic Variable ND Filter is a decent option for smartphone photographers looking to experiment with light control. While the magnetic system is convenient, the potential image quality issues and added bulk prevent it from earning a full five-star rating. If you're willing to accept these limitations, the filter can be a useful tool for your mobile photography kit.

Stable and light - I am thrilled whether with the large camera, the GoPro9 / 10 Black or the smartphone a Xiaomi Mi 10 Pro with the "Super" mobile phone holder (ARNARKOK 360° rotation)

With this endoscope camera, you can look into cable ducts, look at an engine from the inside, or even look inside anywhere you can't easily shine a light into. The camera can be rotated so that you can also look around the corner in a shaft. The light from the camera is very strong, so the image is very well illuminated. Thanks to the battery, one is independent of the mains power. On the memory card you can make recordings, for example, to create evidence. You can also transfer the image to your smartphone

I have already tried a few endoscope cameras. However, these were not as extensive in terms of functions. They were more suitable for checking cavities. Moving the camera by joystick was not possible with any camera so far. Also, the quality of the images was far from being as good as with this model here. However, this is also reflected in the price. Anyone who needs a professional endoscope camera is certainly well served with this model here. In particular, the transfer of the image to the smartphone I find very successful so you can also let other people participate. This should be very suitable for training purposes, for example.

The device is very robust and makes a qualitatively very good impression on me. Even without an instruction manual, you can intuitively use this device right away. Of course, the enclosed user manual gives instructions on how to use it.

From me there is the full score for this endoscope camera. Due to the high price, I recommend this device for the professional craftsman. Especially in engine construction or repair, this camera should be a very great help.

I like the selfie ring light, only issue max brightness is not that bright but it is good.Also, the buttons to control the light need to be closer to base rather than hanging in the middle of power cable.

Although there are numerous choices for video lighting; a larger ring diameter still produces a unique effect unmatched by a smaller unit. It does have a electrical quirk: the "off" position of the power button leaves a dim light rather than a truly off state, requiring one to use the socket switch instead.Overall the Neewer unit represents superb value: a comparable name brand product is easily multiple the cost.

When you open the incoming package, you will find that the packaging is very high quality. The brand is very careful in presenting their products and the materials are of high quality. The filter holder and adapter ring are metal and the filter holder has a spongy area whose function is to seal with the filter without letting light through. Once the filter holder is attached, it is easy to move. crtsal 100x100 quality is very good, with highly polished edges. The filter holder has two slots for square filters, but the advantage is that the ring screwed on the lens can be screwed with another round filter, for example a polarizing filter. I think the picture is very good. As with the brand's round filter, the sharpness is not lost, the color cast did not catch my eye, anything that can be edited during development is appreciated. The ND1000 filter included in the kit enables long exposures in strong light. The sample photos are photos taken on a cloudy afternoon with and without a filter. Those with filters were made with an exposure time of 20 seconds.

Exactly what I needed at a fantastic price!