The past few years I have had the fortunate opportunity to be able to try out many different types of camera equipment. I find that there are three big categories: heavy-duty, standard use, and travel. This tripod from K&F Concept is definitely designed to be in that third group. I have a couple of travel tripods that do a fantastic job of holding my full-frame Canon 5D Mark IV with a 70-200mm lens attached. I said that to mention that sometimes the smaller, lighter-weight tripods get the job done so you don’t have to haul around the heavier standard size mounts. K&F Concept did a nice job with the design of this tripod. It’s very lightweight at only 3.17 pounds, which is comparable to my travel-sized Manfrotto tripod.

This tripod has an impressive total height to it of 78 inches, which should be enough for any photograph you need to capture. I am shooting a wedding in a couple of weeks and I have the idea of shooting above the audience from the back of the venue. At 78 inches, this tripod provides the necessary height to be able to achieve that ‘over-head’ shot I’m looking for. The ball head moves easily enough, but the numbers on the bottom dial are faded and printed in a very light color. It’s hard to read -- even in studio lighting. I personally think that those numbers should be printed in a brighter, more vibrant color -- maybe even neon.

The legs extend easily, but the quick-release flip-locks have very sharp edges. I went to unlock one of the legs and the edge of the lock clipped my finger and I started bleeding. I was surprised to find such a sharp edge on a finished product like this. Another issue I found was with the center column. It seemed as though no matter how much I tightened it, I could still push the column down. I was only pushing down with as much force as a camera load would provide.

I really like that the feet had spikes on them. This provides a lot of added traction especially out in nature. It’s not something you see on every tripod and it was a welcome surprise with this design.

All in all, the K&F Concept 78-inch Camera Tripod is a decent, sturdy tripod for beginners. I think that professional-level photographers might find the same flaws with it that I did. I do think that any level of photographer can get use out of this -- especially in places where it might get destroyed. In other words, it’s a good backup tripod.

The stand is great and has alot of cool features. The only issue I'm having is with the mounting screw that attaches the camera to the stand. It's pretty short and I have a hard time getting it mounted, there should be more threads on the screw.

It took me a bit to get oriented to how to use this tripod as it works a little differently to the usual "standard" tripods I've had in the past, especially in regard to unfolding the legs. The design allows it to fold up really compact for how tall of a tripod it is and it feels solid. My only complaint is that there is no quick release function to snap the camera into the tripod, you have to manually screw and unscrew the quick attach bracket on the bottom of the camera in and out of the tripod to take it on and off. I wish it just had the usual lever to lock it in and out of the tripod, but otherwise it's a great tripod.

This is a sturdy lightweight tripod. It is of good quality for standard use with small recording devices. I use it with a 12" MS-Surface Pro with no problems. The monopod is a nice option, although I haven't used it yet. The handy carrying case was a nice bonus that I wasn't expecting.

Socket for mounting EF cinema lenses on Fuji x-t3, it does its job. I would have liked there to be a screw mount to support the lens from the back as well. For the main lenses, the adapter plays a bit of play on the Fuji mount. Even if the owner Regilent is mounted on the bars.

The past few years I have had the fortunate opportunity to be able to try out many different types of camera equipment. I find that there are three big categories: heavy-duty, standard use, and travel. This tripod from K&F Concept is definitely designed to be in that third group. I have a couple of travel tripods that do a fantastic job of holding my full-frame Canon 5D Mark IV with a 70-200mm lens attached. I said that to mention that sometimes the smaller, lighter-weight tripods get the job done so you don’t have to haul around the heavier standard size mounts. K&F Concept did a nice job with the design of this tripod. It’s very lightweight at only 3.17 pounds, which is comparable to my travel-sized Manfrotto tripod.

This tripod has an impressive total height to it of 78 inches, which should be enough for any photograph you need to capture. I am shooting a wedding in a couple of weeks and I have the idea of shooting above the audience from the back of the venue. At 78 inches, this tripod provides the necessary height to be able to achieve that ‘over-head’ shot I’m looking for. The ball head moves easily enough, but the numbers on the bottom dial are faded and printed in a very light color. It’s hard to read -- even in studio lighting. I personally think that those numbers should be printed in a brighter, more vibrant color -- maybe even neon.

The legs extend easily, but the quick-release flip-locks have very sharp edges. I went to unlock one of the legs and the edge of the lock clipped my finger and I started bleeding. I was surprised to find such a sharp edge on a finished product like this. Another issue I found was with the center column. It seemed as though no matter how much I tightened it, I could still push the column down. I was only pushing down with as much force as a camera load would provide.

I really like that the feet had spikes on them. This provides a lot of added traction especially out in nature. It’s not something you see on every tripod and it was a welcome surprise with this design.

This is a sturdy lite weight tripod. It is good quality for standard use with small recording devices. I use it with a 12" MS-Surface Pro with out any problems. The Monopod is a nice option, though i have not yet used it. The handy carrying case was a nice bonus i did not expect.

The mounting screw reduces in size and wear down fast