I really like the convenience of this magnetic filter system. You only need to thread on the base ring and magnets do the rest. Makes it less likely to damage the threads of your lens if you don't have to keep putting on and removing a filter on every time you need to use it. I am using this with a 24-105mm full-frame lens and the base ring works with the lens cap and the hood although you probably need to remove the hood to snap on the filter because otherwise your fingers get in the way.
Each of the filters themselves are quite a bit heavier than the screw on K&F versions, probably because they need to make the filter ring out of a magnetic steel instead of aluminum. Whatever the reason, they feel a lot more premium than the regular K&F version.
In terms of performance, its a bit of a mixed bag. I don't have tremendous experience using CPL and ND filters (this is my first set) so I don't know what's considered good performance at a given price range.

Moving on, the CPL filter (photos looking out the window) has similar vignette to the ND filter at 24mm but appears to cut down quite a bit of reflections in my windows. Not much for me to point our here, it seems to do the job.
The set does come with a UV filter but I do not intend to use it unless I am in a rainy/dusty environment where my lens needs a bit more protection so I haven't tested it out yet.
For both the ND and the CPL filter, I did not detect any noticeable decrease in sharpness caused by using the filters.
I think the performance of these filters is acceptable. I am a little disappointed with the vignette but I have heard of much more expensive filters having similar issues so I don't want to be too hard on this set. All in all, for someone like me who does this for fun, I think its a great system to learn the basics until I can justify the move to something more premium.

It is a variable ND filter and polarizer. The CPL filter eliminates light reflections on surfaces, cars, water, glass, and also enhances the colors of the sky, leaves, asphalt, etc. Personally, I use it for video so as not to lose depth of field by closing the aperture (from f9 can I can now go to f2.3 without the images burning due to too much light). About the picture quality. Well, excellent: there are no dominants, no chromatic aberration, no loss of sharpness or the terrible X of Gradual ND filters. I have a very expensive polarizing filter and I hardly notice the difference to this one. Price and performance are great!

I had been hesitating between several brands for a while to choose a filter holder for ND and GND filters. I took advantage of a flash sale to acquire this kit. I am not disappointed.
the set seems robust and easy to store.
The case, quite pretty, has 5 compartments, 3 of which, for square ND filters, can be lifted by means of a ribbon. On the back of the case, there is a ring to pass a strap and a passage for a belt. I would have liked a slightly more spacious compartment to house the adapter rings with the CPL filter when it is disassembled.
The assembly (or disassembly) of the elements is well explained in a manual in several languages, including French.

Main positives:
No color cast or loss of sharpness on the first tests carried out.
The plastic frame with its tabs to handle the ND filters.
The CPL filter installation system on the filter holder.
the knurled knob for mounting the adapter ring and the rotating block of the filter holder.
The very accessible wheel to control the polarizing filter.
Firm hold of the square filter on the filter holder.
The robustness of the metal filter holder.

If you have to find some negative points:
The slightly too vigorous maintenance of the square filter in the filter holder.
the click too hard to lock the CPL filter in the filter holder.
No pouch to independently protect the CPL filter in the case.
No CPL protective cover when the assembly is installed on the lens.

The CPL+ND filter does exactly what it promises. It helps reduce glare on windows, protects the camera lens, and adds some enhancement through saturation. Compared to some of my other CPL filters, they have slightly more saturation improvements than other filters. I hardly experienced any vignetting. All in all a good price for an ND filter & CPL filter.

I received the new X-PRO filter set today and have already tested its applicability in the apartment. A judgment on the quality of the filter glasses and the combinability in a shot I still deliver ... The supplied box holds the holder + adapter rings + CPL + ND 8/64/1000. At the drawstring you can pull out the compartments and then very conveniently remove the filters. The plastic filter frames are decently sharp-edged, but not unpleasantly so, and allow you to remove and handle the filter without having to touch the glass. The tabs on the frame also make it very convenient to pull the filters back out of the holder, especially in any order. I have ordered two empty frames in 100 X 150 on the manufacturer's site, which should take my graduated filters after receipt, which I have from another manufacturer. I am curious how well this will work. If it works out, I'll have a complete system for myself, with CPL, three ND filters and two graduated filters (Soft 0.9 and Reverse Soft 0.9). Sliding the filters in and out of the holder requires some force, but is neither awkward nor imprecise. This will then also allow the graduated filter to be aligned well. The handling of the CPL filter with the insertion bracket is great, the turning mechanism is a bit rough, but precise. Screwing the adapter rings onto the lens goes very well, the threads are cleanly made, nothing rubs. Attaching the holder to the adapter ring is also a pleasure and the existing locking screw is very welcome, as the holder can be rotated relatively easily on the ring. The handling of the system has already convinced me, with "only" two slots I can live well for my needs and I look forward to the first use, in the next few days, in the great outdoors and with cold fingers. I have so far worked with round screw filters and waived graduated filters, which I now want to change. I also looked at the system from Rollei (Mark II), which can not keep up with the X-PRO from K+F in handling. Everything very flat and fiddly, offers little surface for holding and joining the parts. Getting the polarizing filter or adapter ring out of the holder again is no fun and almost impossible with cold fingers. K&F has solved this much better. Who wants to use graduated filters is very well served with the X-PRO set, who only needs gray filters, I would advise a magnetic round filter set, whose diameter is well above its largest lens, which is even faster to use, is more compact and should then not darken with several filters in parallel.

As a photographer, I use filters, but it's not always easy to put on or take off depending on the situation. But with this system, it becomes so simple that it's almost instantaneous. The product is of very good construction quality and it comes with a 4-pocket pouch that is very well made and resistant against possible knocks. It can be attached to the belt with a Velcro. The kit is composed of two screw rings, one UV and one vacuum on which the CPL filter or the ND1000 can be fixed. I really wanted to go and test this new product. First with the CPL filter alone and then with the CPL filter + the ND1000 together. The results are just astounding. Here are the renderings with the CPL filter on the left and the CPL + ND 1000 on the right. With the filters it does there is no loss of sharpness, and color drift is almost nil. The CPL filter polarizes perfectly and the ND 1000 filter is very surprising in terms of its performance, it is very thin which limits vignetting, a plus. By using the two together, it is better to avoid ultra wide-angle focal lengths, but from 16mm, no worries, you can add them. In addition, they are compatible with my sun visor, I was able to put them on and take them off without having to take them off very easily because the magnetic force is perfectly dosed. Really very satisfied with this first outing, I hope others Intermediate magnetic filters with this system will be released soon to complete the offer. If there were magnetic lens caps, that would be great.

The DJI Action 3 camera already takes really good pictures by default, but using ND filters makes the pictures even more intense. The set was delivered in a practical box, ideal for storage on the go.

A CPL filter is used when pictures are to be taken despite strong sunlight and reflections from water or windows. This prevents details from being lost due to overexposure. A polarizing filter (or polarizing filter for short) is a polarizer for light. Polarizing filters are known to be a "must have" for every photographer.

The filters CPL + ND) are only screwed, like the original, so a quick change is possible. The CPL filter is my favorite for photos and videos, whether with my drones, my DJI Pocket2 and now also with the Action 3. Because it gives the colors more contrast and minimizes reflections considerably. The ND8 and ND16 are often used for the ND filters. The ND32 when it's extremely bright, in winter when it's snowing, on days with clear skies and clear sunshine. The ND 64 softens the fast movements in waterfalls and clouds, which comes across really well. Because everything else is razor sharp. Try it yourself and compare the results.

The quality of the materials is impeccable and the processing of the filters is perfect. The attachment is easy, they hold reliably, fit exactly like the original. The filters are also tight underwater, which I tested yesterday in a body of water with a stick extension.

Explanation of the ND filter: I use them for long-term exposure and depending on the sunlight. This allows you to take softer shots. For example, gently blurring waterfalls and clouds.

What is a neutral density filter/ND filter? A neutral density filter is a filter where the glass is completely darkened so that less light can enter the lens.
So it is possible to choose longer shutter speeds and to achieve the corresponding effects, such as foggy water or soft, long-drawn-out clouds. This would not be possible without a filter, as the image would be extremely overexposed or even completely white.

I am very satisfied with this filter set and can recommend it unreservedly.

Thank you for taking the time to read my review. I hope that I could be of some help.

These CPL ND filters are literally the most common filters I use with friends when we're filming stuff.
These K&F filters are a brand I have never used. These filters didn't add any weight to the drone which is nice, they were super easy to install and remove and the kit offers a very good range of filters to suit almost any situation.