This ring allowed me to use my Nikon's lenses on the Fuji. My XT2 fits both the adapter and the lenses perfectly and the photos are excellent. Of course, when assembling the adapter, you will feel a little more weight, but everything is worth the opportunity to expand the range of lenses, and then the materials used are excellent, so the weight is more than justified. Very satisfied

The device worked flawlessly with my Nikon F lenses and Fuji XT-4. For AF-D lenses, you can set the adapter's aperture to its smallest size and then control the aperture ring on your lens to achieve a more accurate aperture). With G lenses, the aperture is controlled by the ring on the adapter. I've tried zooming in from wide-angle (14mm) to ultra-zoom (400mm) and it worked with no problems. I could have paid 5x to 10x for the adapter so that's a real saving here.

This adapter adapts my Nikkor lenses to my Fuji body (X-T1). It works perfectly and looks very good too. Like the flat black and silver rim. The silver ring in the center is for aperture control, so it also works for Nikon G lenses without an aperture ring and allows you to manually control the aperture of your Fuji. My copy is a little tight on the Nikon receiving end but works very well. And since I've had a few that were too loose, I don't mind. The aperture ring is 6-7 clicks so is better than the Fotiodix version I have which is only 3-4. Not much more to say but that it works well and allows me to use all my Nikon lenses on a Fuji body. Of course, this is all manual control, not autofocus or exposure control — just a metal tube that lets you mount Nikon lenses. At this price it's a great deal and works beautifully. It wasn't available for Prime when I got it and it took me about 2 weeks to get it.

had bought a Fuji X-T10 mirrorless camera and was waiting for a Fuji lens to arrive so I could use it. I had a Nikon 35mm g at home and I was thinking about using it on my Fuji while waiting for the proprietary lens. After careful research I have ordered this wonderful adapter which I will try to describe below. It arrived in a small cardboard box wrapped in shockproof plastic. The adapter is made of excellent material, it is made entirely of metal and is pleasing to the eye. It can be installed easily and quickly on both sides. It has a metal ring that is used to close and open the membrane. That last feature deserves an explanation: the adapter has no electrical contacts, so any lens you mount will lose autofocus. If you mount a lens that is equipped with an aperture ring, you can use it without any problems because the adapter does not interfere with this ring. On the other hand, if you mount a lens without an aperture ring, as in my case, you can have trouble selecting the apertures that the mirrorless camera actually no longer shows on the display. However, this adapter features a ring for minimal control of the diaphragms. To get the best out of it, before mounting the lens, make sure the adapter ring is fully closed (smaller ball), then mount the lens. Then mount the adapter on the camera. In the case of the XT-10, I had to select non-lens speech noise from the settings menu and that was it. Despite the lack of autofocus and minimal control over the apertures, I took wonderful photos. Highly recommended for those who are already experts at manual focusing.

As always good delivery and handling by Amazon. I bought the adapter to be able to use my Nikon full-frame lenses on my new Fuji XT20. The adapter is very high-quality and extremely precise. The lenses sit absolutely free of play. I was a little worried at first and only tried the adapter with the 50 /1.8. The ring is delivered in a sturdy plastic box, so 5 stars are almost not enough.

I was looking for an adapter for my Fuji to be able to use my Nikon lenses with it. I then ordered this adapter because Metabones, Novaflex and the others were just too expensive for me. The quality is very good, the adapter fits very well. The aperture ring works perfectly for Nikon lenses without an aperture ring and locks into place at the respective aperture. Could be a bit stiffer, but that's whining at a high level. Of course, there is no autofocus. All in all a very good adapter and can be recommended without reservation. If you liked my review, I would be very happy if you clicked "Yes".

I bought the adapter ring for my Nikkor 50 mm 1:1.8 G so that I can still use the beautiful lens on my new Fuji X-T1. But ATTENTION: at first I could not trigger and thought that the adapter ring was defective. I have emailed the company to see if they know why I am having this problem. They wrote that the ring was probably defective and would not work with a Nikkor 50mm f/1.8G anyway. But I didn't believe it and kept researching. And here's the solution: you have to go to point 3 of the recording menu, there you have the option "Rec. without obj.". I had "OFF" activated here. However, the ring only works if "ON" is set.

Well made, good quality, fits my Fuji perfectly. Be sure to choose the version with the aperture ring! There is no autofocus, as the adapter enables a purely mechanical connection, but manual focus gives the photographer completely different options as long as the images are not moving. I use it with Nikon's cheap Nifty Fifty (AF Nikkor 50mm 1:1.8 D) for still images, portraits etc. The Fuji XF 18-55 f2.8-4 RLMOIS for everything else that's more moving. A good, cheap, compact and not heavy team for excellent pictures. It is important to set "Capture without a lens" to 'On' in the menu under 'Wrench' / 'Key wheel settings'. Since the adapter is purely mechanical, the Nikon does not recognize the lens. Once set like this, both the Fuji lenses and those connected with an adapter ring will work. Top!