I am very happy with the smoothness and sturdiness of this fluid head tripod! The tilt and pan are both very smooth as advertized! My zoom lens is very heavy so I needed the tri pod to be able to carry the load well. The bag it came seems sturdy as well. I'll be putting this equipment to the test for sure!

This is a very good tripod. I have a Benro with fluid head for my Sigma 600m. But I needed a more versatile tripod for my landscape and macro photos and this is the best, easy to use, very good materials and you can use it in a lot of positions that helps you with the compositions.

it is very stable, much more stable than more expensive mobile video tripods. fluid head is not perfect but also works very well, even with larger setups. I wouldn't be afraid of the head falling forward or backward because of the weight. the legs are also very sturdy and not flimsy. Definitely recommended, especially because of the price/performance ratio. you don't always have to buy the best-known brands, you have to buy the right thing for the right price.

Was looking for another tripod with a removable head so I can fit my Manfrotto fluid head onto. The tripod is super compact, lightweight and sturdy.

This tripod has allowed me to do overhead shots and amazingly it's holding my Panasonic GH5, but obviously you have to make sure you have the supporting leg in the same direction.

Overall I'm very happy with it and it's so versatile for many different scenarios.

The tripod comes in a nice carrying bag made of good material.
The product is designed to take up as little space as possible - a big plus.
I'm not a big fan of rounded leg locks, but these seem solid.
Maximum height is above my eye level - Im 1.75m.
I like the versatility of the ball head with the extendable center pole. You can put it at 90 degrees and do food photography for example.
The head itself with the plate isn't at a pro level but I'm not a pro and it stays compact and that's a big consideration for me. The Pro head can easily cost 1.5-2x more than this whole package, so I'm very happy with the cost.
If you like monopods, there is a leg you can unscrew and put the head on.
Recommended indeed.

This very lightweight carbon fiber tripod comes in cylindrical bag that is only a little over 20 inches long and 5 inches in diameter. To fit into the bag with the pan and ball head mounted, the center column is extended full length and the telescoping legs are then collapsed, unlatched and then folded upward and parallel to the center column. I think this is going to be the tripod of choice for traveling because it is so much more substantial than our other compact tripods but the bag is only slightly larger in diameter.I'm still coming to grips with twist-locks for the telescoping legs (I find levers to be quicker), but I'll get used to them. I find that I prefer using this tripod with the last section of the legs left unextended, putting the top of the camera plate at about belly-button height for me. This provides the best stability, and I can still extend the center column to raise it if need be.Thankfully the ball and pan head on this tripod are nearly perfect. I have had bad experiences with other compact tripods with swivels that wobble unless locked down. For photography this is rarely a problem anyway because I'm usually locked when in position, and I don't really use a tripod like this for panning video. But I do appreciate the smooth, wobble-free motion of the K&F head.The ball head is equally perfect. With the notch in the ball head socket positioned straight forward to allow the camera to aim downward, the locking lever/knobs for the ball head and pan are conveniently located at equal angles left (for the ball lock) and right (for the pan lock). The ball lock is a lever instead of a knob, which gives a little better grip for tightening, and it has the common spring-loaded coarse repositioning mechanism that allows you to pull it out and reposition it to the optimum angle. The Arca-Swiss saddle lock and the pan lock are both fluted knobs.The locks for setting the leg angle are spring loaded. To widen the legs you pull the latch fully out, but when collapsing the legs to steepen the angle the latches pull in on their own and don't need to be pushed in as with some tripods.There are three 1/4-20 tapped holes for storing camera plate screws located between leg attach points. One spare screw is included.I think this is probably going to be my most commonly used tripod. It's compact for travel and yet stable enough for day to day use.Highly recommended.

This very lightweight carbon fiber tripod comes in cylindrical bag that is only a little over 20 inches long and 5 inches in diameter. To fit into the bag with the pan and ball head mounted, the center column is extended full length and the telescoping legs are then collapsed, unlatched and then folded upward and parallel to the center column. I think this is going to be the tripod of choice for traveling because it is so much more substantial than our other compact tripods but the bag is only slightly larger in diameter.

I'm still coming to grips with twist-locks for the telescoping legs (I find levers to be quicker), but I'll get used to them. I find that I prefer using this tripod with the last section of the legs left unextended, putting the top of the camera plate at about belly-button height for me. This provides the best stability, and I can still extend the center column to raise it if need be.

Thankfully the ball and pan head on this tripod are nearly perfect. I have had bad experiences with other compact tripods with swivels that wobble unless locked down. For photography this is rarely a problem anyway because I'm usually locked when in position, and I don't really use a tripod like this for panning video. But I do appreciate the smooth, wobble-free motion of the K&F head.

The ball head is equally perfect. With the notch in the ball head socket positioned straight forward to allow the camera to aim downward, the locking lever/knobs for the ball head and pan are conveniently located at equal angles left (for the ball lock) and right (for the pan lock). The ball lock is a lever instead of a knob, which gives a little better grip for tightening, and it has the common spring-loaded coarse repositioning mechanism that allows you to pull it out and reposition it to the optimum angle. The Arca-Swiss saddle lock and the pan lock are both fluted knobs.

The locks for setting the leg angle are spring loaded. To widen the legs you pull the latch fully out, but when collapsing the legs to steepen the angle the latches pull in on their own and don't need to be pushed in as with some tripods.

There are three 1/4-20 tapped holes for storing camera plate screws located between leg attach points. One spare screw is included.

I think this is probably going to be my most commonly used tripod. It's compact for travel and yet stable enough for day to day use.

Highly recommended.

Was looking for another tripod with a detachable head so I can mount my Manfrotto fluid head on it. The tripod is super compact, lightweight and sturdy. This tripod has allowed me to shoot overhead and amazingly it holds my Panasonic GH5 but of course you have to make sure the support leg is pointing in the same direction. Overall I'm very happy with it and it's so versatile for many different scenarios.