very sturdy and tall! but beware: you can pinch your finger in the leg...

K& F concept aluminium tripod with 180 degree tiltover camera head

Summery: Lightweight, sturdy, the tiltover head gives a special feature I wanted.

I own quite a few tripods and camera mounts because I have so many cameras so this one joins my collection for a special reason which I will explain in a short while.

The model is KF-TM2515T

It has 4 part telescopic legs that extend to a give a maximum tripod height of 6o inches, the legs can be used in 3 different angle positions which is adjusted using the red button at the top of each leg, there is no central connector so each leg angle can be set individually.

The centre column is in 2 parts, the outer part can be height adjusted while the second section can not only be extended vertically but it can also be tilted over 180 degrees, it was this feature that made me decide to add this to my collection, more on that in a while.
As with a lot of tripods you can invert the centre column to allow low level and macro shooting, but the tillable section adds a little extension to give a different view than one bound to the centre, you can even make an ad-hoc slider shot by slowly moving the bar along the centre column.

The tripod head is a standard 3/8 thread panning ball-head type that are found on many of my tripods, I like ball-heads for my smaller cameras. It has an Arca-Swiss type quick release clamp with a bubble for camera levelling.

The tripod is lightweight, strong, it folds down pretty small and comes with a strong looking zipped case with straps so for general purpose use it is great, with the added tilt feature to give some extra creative assistance.

Now the reason I bought this particular tripod…..I need to be able to mount 2 cameras on one tripod properly, and this tripod helps me do just that with a little bit of extra kit.
The end of the centre bar has a small plastic cap screwed into it, when taken away a 3/8 thread is revealed, most of my tripod centre column have this, it is usually there to hold the sandbag hook screw. So by using a short 3/8 inch threaded bar and an extra ball-head I can make a double tripod. Fantastic and very useful to save space when shooting.

One leg can also be removed and used with the centre column as a monopod but I already have monopods so I will not be using that feature with this tripod.

This is K&F Concept 200mm Metal Mini Tripod.
It is for smartphones like iPhones and Androids, that are used to record still or moving images.
The model number is MS05 (this is useful to know when searching online for videos etc.)
At the time of writing, the ASIN is B0CPHKYMV5.

It has a quarter inch screw desktop tabletop stand with phone holder
It comes with a bluetooth remote control; this makes it handy for snapping yourself.

Unlike other tripods, especially small tripods, this seems EXCEEDINGLY ROBUST!
It can apparently load up to 20 kg with 2 levels of height adjustment

Category: Camera & Photo → Tripods & Monopods → Tabletop & Travel Tripods

K&F Concept 200mm Metal Mini Tripod for Camera Phone, 1/4 Inch Screw Desktop Tabletop Stand with Phone Holder and Bluetooth Remote Control, Load up to20kg with 2 Levels of Height Adjustment, MS05

I attach cameras to the bracket.I found out my two cameras CANNOT be tighten to the adapter.As if the screw is too long.What gives?Are all tripods like that ?Or defect? Other then that nice tripod.

Bought this to replace my aging travel tripod that has a damaged leg. This is pretty heavy compared to my other tripods and probably isn't something I will be carrying on long hiking trips. The legs are pretty solid as well as the head. It folds like 2 of my other tripods so it's not something that I'm not used to. I like the detachable monopod leg and should be great to take on bird photography trips. It has the same feature as my travel tripod that I can flip it over and get my camera very close to the ground for ocean and sunset pics on the beach. The tripod along with a Canon 90D with battery pack and my 70x200 L lens plus a 1.4 extender is pretty heavy together but it will work fine for most of my photos. Expect long 10k plus hikes like I mentioned earlier. Gave it 4 stars because of the weight.

This is lightweight and seems to be well built. It could be a little taller, especially the single removable leg. Overall good, would buy again.

I have 2 cameras and several lenses, power supplies and 2 tripods, I also have a computerised mount for astrophotography. It All fit! As we know it is the horizon that can make or break a "star show" this will allow me to travel off the beaten trail for those "places" of wonder.As far as cons... well if you need speed to get your camera out the front pack can accommodate this. it is a bit bulky for action shots however if you landscape its good for one of the smaller wide angle lenses, diameter is limiting however, and fits my Nikon with a mounted lens quite nicely.

I have carbon fiber leg/magnesium head tripods from the well known traditional brands that are many times more expensive than this D225C0+BH-25- and do NOT perform any better! My expectations were low considering the price and weight. But it greatly exceeds all my expectations.

Perfect travel gear for use with low weight mirrorless cameras and moderate weight lens. It will be the only tripod going with me on most trips from now on.