This is the best Tripod I have ever used. I will admit I have always thought I would not benefit from a higher quality Tripod as an Amature Photographer with a Systems Camera gear (Olympus OM-D EM5 Mark ii). I was wrong and now I will not go back to cheaper lower quality Tripods in the £20 to £30 range that I have been using.The OMD EM 5 ii quite unbalanced when used with the large and heavy Olympus 12 - 40mm 2.8 Pro lense. But with this Tripod I can even shoot in some windy conditions all I need is to just spread the legs to create a very wide base of support. I did that outside in the wind and light rain and I even tried to knock it down, it would not go down.I like that it can be converted into a tall Monopod, really handy. Making adjustments is easy and a leaflet is included for guidance. It does have a Professional look.

A ring that gets the job done without a hitch. Well done with a nice satin finish I use it to mount a Helios on my X-T4. I haven't noticed any play and it's easy to set up and take down. The focus to infinity is effective, no problem on that side either. The orange decoration lacks flavor, at least on a Fuji. Other than that smash, I recommend this ring.

I'm really very happy with the purchase, this adapter is amazing, the membrane ring is very fluid. The good thing is that the system for opening the aperture works perfectly with Nikkor lenses, Nikon G, Tamron (Nikon mount), Sigma (Nikon mount), something I didn't find in my old adapters (they only worked with Nikon brand lenses). Besides the excellent functionality, it is also easy on the eye. It's not very heavy, but not too light either, suggesting the use of "full" materials.

If the crush ring is not attached in the Lock position, the aperture blade will not move in the Open position. The EOS M-mount adapter is built better than the SONY E-mount adapter with just the narrower pin (laughs), but despite the fact that the body is too small, the lens weighs quite a bit. So if it is not an adapter with a tripod seat, the mount and the camera screw will be put under enormous stress. Most importantly, FD adapters don't require any tools, and there are few things that detach the tripod seat, so that's an issue.

This Sony E-mount camera adapter ring is sturdy and fits Nikon lenses perfectly. It is highly recommended for those of us who have those old analog lenses, but of course, from the unbeatable quality, you have to focus manually, but no matter, the good quality of the old lenses compensates. let's say trouble, I recommend this K & F brand adapter to everyone, thank you.

NIK-NIK Z-Ring single ring, without coupling: Nikon Z-mount male mount, Nikon F-mount mount female for pre-AI, AI and AIS lenses. You can therefore use old lenses whose pre-AI bayonet can damage the FTZ. No problem with a Nikon Z: the light is measured at the actual aperture and manual focusing is done with colored markings in the viewfinder. So I use my old 50mm 1.4, my 20mm 3.5 UD, my 300 4.5 Nikkor H which are all 50 years old... and my AI 50.135 and 200. The ring is well built, no play and we have infinity. NIK(G)-NIK Z-Ring Attention, for Nikon G lenses you need the Nikon FTZ or the NIK(G)-NIK Z-Ring, which allows you to maneuver the aperture, which do not have a ring on the lens. With the NIK-NIK Z, the G lens remains closed at the smallest aperture, so no modification is possible. Attention should also be paid to the IBIS: you need to record the focal length of the manual lens and specify it when using the camera: vibration compensation is much more effective if the Z camera knows the focal length.

A ring that does the job without a problem. Well made, with a nice satin finish, I use it to mount a Helios on my X-T4. I did not detect any play, and the assembly-disassembly is done without worries. The focus on infinity is effective, no problem either on this side. The orange decoration is a bad taste, at least on a Fuji. Apart from this trifle, I recommend this ring.

The ring does what it is told. I deduct one star for the fact that I had to readjust the mount myself so that the aperture and focus indicator of my lenses is straight and not on the side.