This filter was purchased for a 12~60mm Panasonic lens mounted on an Olympus OM-D E-M5 MKII. It was difficult to screw on because the first thread was difficult to engage properly despite handling the notches milled on the ring. Thinking it had it fitted, it was unpacked when I took the sun visor off. It is therefore important to check that it is tight and fully screwed. Otherwise nothing to complain about, it protects the lens and filters the light

This lens filter and cap are of excellent quality.

I now have this amazing filter attached to my Olympus 60mm macro lens. The lens has no lens hood, a bad front cap and obviously no filter. This is now on board, along with a tidy front cap and third-party lens hood. 46mm is a little small and fiddly, but this one has a really good knurled ring that feels good in the hand. The thread is also very smooth and positive. The color balance is imperceptibly different, so it doesn't bother when shooting in well-lit close-ups. I love the improvement on this brilliant lens. ricky

Great filter and lens cap. I'm thrilled

bought the 77mm version of this filter to protect my Olympus 300mm Pro lens. While doing bird photography in Ecuador, I had problems with this lens. All photos were blurred. I had used the lens 2 weeks earlier and the images were crisp. I had to throw away a whole day's work because every picture was bad. I put the lens away for the rest of the trip thinking the lens was going bad. I got home and started testing the lens. I noticed that with the filter, all the images were blurry. So I removed the filter and all the images came out crisp. So be very careful when using this filter at least on Olympus cameras and lenses. I've since put on a B+W filter and it works flawlessly.

purchased the 77mm version of this filter to protect my Olympus 300mm Pro lens. While I was doing bird photography in Ecuador, I had problems with this lens. All photos were blurry. I had used the lens 2 weeks previously and the images were razor sharp. I had to throw away a whole day's work because every picture was bad. I put the lens away for the rest of the trip thinking the lens was going bad. I got home and started testing the lens. I noticed that with the filter all the images were blurry. So I removed the filter and all the images were razor sharp. So be very careful when using this filter at least on Olympus cameras and lenses. I have since put on a B+W filter and it works perfectly.

Hello, the adapter should be used with manual lenses from the analog era, logically. On an Olympus E-PL7, I was curious about the usability and above all the achievable image quality. Since of course there is no electronic data exchange between the camera, lens and lens adapter, the camera or the image stabilizer should/can be set first to prevent camera shake Reduce. To do this, press the OK button, bring the image stabilizer to the desired setting. Then simply press the Info button and set the originally used focal length at the bottom right and you're done. The lenses came, to name just two, the Olympus G-Zuiko 1:3.5/28mm and the telephoto lens Olympus E-Zuiko 1: 4.0/200 mm. Of course, these are also used analogously on an Olympus OM-4 Ti. The adapter is well made and makes a solid impression. However, he has a slight lateral play on the bayonet. I guess less than a millimeter. But this doesn't affect the focusing at all, at least not with my lenses. I've experienced other things, and even without an adapter solution. So nothing earth-shattering, especially not at this low price. Of course it will then the camera, with the adapter and, for example, a G-Zuiko 3.5 28mm no case more suitable for jackets, and at almost 630 grams also heavier than, for example, with the Lumix 1:1.7 25mm at almost 490 grams. I like this Lumix, no question about it, but compared to the G-Zuiko 3.5 28mm, it seems to be attached to the camera, I would say "less high quality". If you have problems with manual focusing on an E-PL7, for example, I can recommend the Olympus VF-4 attachable viewfinder. The thing is great, so it can be adjusted well without a sectional image and/or microprism ring, as is the case in many analog cameras. Of course, focus peaking can also be used, but this function must then be assigned a button in the menu, e.g. the Fn button for quick access. The test JPEG photos I uploaded are all unprocessed and show quite good sharpness, colors and contrasts. My conclusion: Recommended and inexpensive adapter solution, but also with a slight tolerance on the bayonet.

Bought to use my old Nikkor 50mm 1.8 Ai-s on an Olympus Pen E-PL7 as a portrait lens. The adapter pleases both visually and haptically and is very well made. Securely attaches to Nikon lens, securely snaps onto Pen's MFT bayonet like an Olympus or Panasonic lens. Nothing wobbles, no play. I have not tested the light tightness of the adapter against stray light under darkened conditions. The adapter is quite massive at 97 g, but this is reflected in a balanced weight distribution, a pleasant feel and also in a shake-free handling of the entire camera. In connection with focus peaking, manual focusing is really fun. I can use it to focus manually at least as well and quickly as I used to with the sectional image screen of the analogue SLR camera.