This bag is really well made. The main compartment is far more rigid than you think, with lots of padding and good side access and full access. Clip straps add a second layer of access protection while still allowing for easy side access. I can easily fit my Canon M50 MkII + 15-45mm kit lens (in it's case) + 22mm lens (in its neoprene case) + 55-200mm zoom lens (in its Canon soft bag) + space for a future lens (the neoprene case is already there). The side panel has a great zip pocket for SD cards and extra battery. The side pocked can be used for a tripod or a water bottle. The top compartment is also rigid, and can hold other bits - for me it's a blower brush, lens cloth, filter sleeve, lens caps etc. (an my kentfaith selfie stick!) The zippers are Nic and smooth and easy to open using a single hand via the pull loops. I love it!

Moved over to mirrorless camera setup and needed a new filter for it. There case for it is great, I can use it to hold securely any filter not just the one I bought. Images seem sharp and does exactly what a cpl filter should do. Overall pleased with product

I like this camera it comes with a case.

usually don't use the shoulder strap when carrying the camera around because I find it uncomfortable. That's why I've been using a neoprene wrist strap for some time now. That's why I was really looking forward to trying this tip from K&F, which right from the packaging looks like a product with attention to the smallest details. The hand strap is made of high quality materials: the plastic of the buckle is thick and sturdy and there is a safety clasp that prevents accidental opening when the two tabs are pressed. The soft part is made of very resistant Duraflex and leather: when you wear it it is quite comfortable, but here I would have preferred to use something softer like neoprene in contact with the skin. The strap I used previously had a slider that had to be tightened after wearing and then loosened to remove the strap. This was a bit inconvenient when you wanted to stow the camera away, as it meant that operation wasn't very quick. This tip has a different mechanism. In fact, there is a metal slot in which the tip runs and therefore closes like a loop. This way the strap loosens very quickly when you want it to and tightens just as quickly on the wrist. From a certain point of view, this may be a small security obstacle, since a malicious person could pull the camera from the wrist, but in my opinion it is not that simple, and the convenience of this mechanism certainly justifies taking some small additional precautions. It should be noted that the two lanyards that come into contact with the camera rings are manufactured to have a different color depending on the state of wear (they rub against the metal and therefore wear out over time). When it is time to replace them, they will indicate this themselves. I was very happy with this product, which I find well made and well thought out. The price is not among the cheapest, but I think it is justified by the attention to detail and the materials used.

That's the nice thing about modern mirrorless system cameras: You can continue to use older lenses that were intended for analogue SLRs by connecting them to the camera using a manual adapter. This works very well, you even have a preselection aperture facility, ie you only set the aperture on the lens, only when you take the picture do you turn the aperture locking ring on the adapter to the position - very helpful. I can only recommend using "old" analog lenses on the new mirrorless ones! I bought a Canon FD 50mm macro, an FD 100mm macro, an FD 35-70 and an FD 80-200 for a few euros and I am extremely satisfied with the image quality on the 61 MP sensor of my Sigma FP L, even with 100% view on the monitor. The lenses mentioned are sharp to the edge. This turns out to be a myth that analog lenses cannot be used digitally because the resolution of these lenses is too low. I can definitely recommend the K&F adapter. It is precisely manufactured and slides smoothly into the camera's bayonet.

had bought a Fuji X-T10 mirrorless camera and was waiting for a Fuji lens to arrive so I could use it. I had a Nikon 35mm g at home and I was thinking about using it on my Fuji while waiting for the proprietary lens. After careful research I have ordered this wonderful adapter which I will try to describe below. It arrived in a small cardboard box wrapped in shockproof plastic. The adapter is made of excellent material, it is made entirely of metal and is pleasing to the eye. It can be installed easily and quickly on both sides. It has a metal ring that is used to close and open the membrane. That last feature deserves an explanation: the adapter has no electrical contacts, so any lens you mount will lose autofocus. If you mount a lens that is equipped with an aperture ring, you can use it without any problems because the adapter does not interfere with this ring. On the other hand, if you mount a lens without an aperture ring, as in my case, you can have trouble selecting the apertures that the mirrorless camera actually no longer shows on the display. However, this adapter features a ring for minimal control of the diaphragms. To get the best out of it, before mounting the lens, make sure the adapter ring is fully closed (smaller ball), then mount the lens. Then mount the adapter on the camera. In the case of the XT-10, I had to select non-lens speech noise from the settings menu and that was it. Despite the lack of autofocus and minimal control over the apertures, I took wonderful photos. Highly recommended for those who are already experts at manual focusing.

Very stable, easy to attach my phone or my Mirrorless Micro 4/3 camera! Great for trips and professional quality shoots! Took it on my last trip to SC and really took some great shots with it! I would upload them but likely the review won't get posted if I do.I was able to set it up in about 30 seconds to a minute and adjust it how I needed in another minute or so.A tripod like this is a must have for anyone serious about photography.

For quick, down and dirty traveling, this is a good tripod. From the outset though, I would not recommend this tripod with a heavy DSLR and heavy lens like the Canon 70-200L.If your primary use is a regular DSLR or Mirrorless camera, then you'll probably really like this tripod.At full extension, it is not super-stable, but can be mitigated with hanging weight from the hook. Extension is easy and will extend to about 6ft. The ball-head will accomodate Arca Swiss base plates, but with a camera attached, the ball head tightener needs to be adjusted strongly to hold in place.One feature that is a "LIKE" is the ability to reverse mount a camera UNDER in order to take ground-level shots.The tripod comes with a zippered travel case and will easily fit in luggage or attached to a backpack.All in all, I rate this with FOUR STARS due to stability at full extension, and honestly, I think it's a bit overpriced for the performance it provides. For general, non-professional use with a normal DSLR and lightweight lens, Phone, Mirrorless or similar camera, it should do the trick. Otherwise, I'd be looking for a more robust solution.*If you found my review helpful to you, please let Amazon know by clicking the "HELPFUL" button below!