For a long time I was looking for a travel tripod that is compact and handy. Whenever hiking or holiday tours were announced, I had to fall back on my Nanomax 400T. Unfortunately, this is just as high as German bridge railings at maximum height. After some time I came across the TM2324. Short preliminary conclusion: The processing is very good. The tripod is trimmed for photo tours. Thanks to the light 1.3 kg and quick-release fasteners on the legs, it can be taken anywhere and set up super quickly. The ball head with panorama function runs smoothly and feels secure. Details: 1. Key data: The tripod is 47 cm long when folded. If you set it up you can reach a maximum height of 159 cm (at the quick release plate), which is significantly higher than German bridge railings. The weight I measured was 1.31 kg with the ball head and 1.05 kg without the ball head. Despite the tripod, a lot still fits in the case. 2. Ball head: The ball head not only has the actual ball head function, but also a panorama function. The larger wheel releases the ball head. This runs smoothly and can also be swiveled downwards by 90° at one point. The smaller wheel is used for the panorama function. This runs just as smoothly and, as the name suggests, enables panoramic shots, since only the vertical axis is released. If you just crop images you lose resolution (if the focal length allows it at all). If you use the built-in panorama functions, you actually get a higher resolution. 3. Quick release plate: The quick release plate and holder are made of plastic. In this way, a little weight could probably be saved here as well. The plastic looks very valuable and stable. At first glance I thought it was metal. A spirit level or dragonfly is installed in the recording, so you can align the camera straight in the field. 4. Central plate: The feet can be locked in 3 positions with snap hooks on the central plate. Although the clamps feel somewhat "loose", the legs are surprisingly well fixed in the locked position. The middle bar is held by a classic twist lock. 5. Tripod legs: The tripod legs are equipped with quick-release fasteners. They look solid and are particularly useful when you're on the go and don't want to screw forever before you can pull out the leg and then screw it back on. With the quick-release fasteners, this can be done in a few seconds. The tubes themselves are made of black, brushed aluminum. I found no iron or steel on the legs. So nothing can rust if the tripod is placed in a stream or in the sea. One of the legs is partially covered with foam. You can carry the tripod well on it. It's so much more pleasant, especially when it's minus degrees. 6. Bag: The bag looks well made and is of course precisely adapted to the tripod. You can either carry it by the handle or hook it into the included strap. A reflective strip should probably serve to make you better seen by drivers on night hikes. Although I never really carry my tripods in bags, I find them quite successful. As you can see the weather has been bad for a long time but I didn't want to deprive you of my experience. As soon as the weather gets better I will try to send some more pictures later. I bought and paid for the K&F Concept TM2324 as usual via Amazon, but I get the money refunded as a product tester. As always, my opinion remains independent and honest.

For a long time I was looking for a travel tripod that is compact and handy. Whenever hiking or holiday tours were announced, I had to fall back on my Nanomax 400T. Unfortunately, this is just as high as German bridge railings at maximum height. After some time I came across the TM2324. Short preliminary conclusion: The workmanship is very good. The tripod is trimmed for photo tours. Thanks to the light 1.3 kg and quick-release fasteners on the legs, it can be taken anywhere and set up super quickly. The ball head with panoramic function runs smoothly and feels secure.Details:1. Key data: The tripod is 47 cm long when folded. If you set it up you can reach a maximum height of 159 cm (at the quick release plate), which is significantly higher than German bridge railings. The weight I measured was 1.31 kg with the ball head and 1.05 kg without the ball head. So, despite the tripod, a lot still fits in the case.2. Ball head: The ball head not only has the actual ball head function, but also a panorama function. The larger wheel releases the ball head. This runs smoothly and can also be swiveled downwards by 90° at one point. The smaller wheel is used for the panorama function. This runs just as smoothly and, as the name suggests, enables panoramic shots, since only the vertical axis is released. If you just crop images you lose resolution (if the focal length allows it at all). If you use the built-in panorama functions, you actually get a higher resolution.3. Quick release plate: The quick release plate and holder are made of plastic. In this way, a little weight could probably be saved here as well. The plastic looks very valuable and stable. At first glance I thought it was metal. A spirit level or dragonfly is installed in the recording, so you can align the camera nicely even in the field.4. Central plate: The feet can be locked in 3 positions with snap hooks on the central plate. Although the clamps feel somewhat "loose", the legs are surprisingly well fixed in the locked position. The center bar is held by a classic twist lock.5. Tripod legs: The tripod legs are equipped with quick-release fasteners. They look solid and are particularly useful when you're on the go and don't want to screw forever before you can pull out the leg and then screw it back on. With the quick-release fasteners, this can be done in a few seconds. The tubes themselves are made of black, brushed aluminum. I found no iron or steel on the legs. So nothing can rust if the tripod is placed in a stream or in the sea. One of the legs is partially covered with foam. You can carry the tripod well on it. It's so much more pleasant, especially at minus degrees.6. Bag: The bag looks well made and is of course exactly adapted to the tripod. You can either carry it by the handle or hook it into the included strap. A reflective strip should probably serve to make you better seen by drivers on night hikes. Although I never really carry my tripods in bags, I find them quite successful. As you can see the weather has been bad for a long time but I didn't want to deprive you of my experience. As soon as the weather gets better, I'll try to submit a few more pictures. I bought and paid for the K&F Concept TM2324 as usual via Amazon, but I'll get the money refunded as a product tester. As always, my opinion remains independent and honest.

It is a high-quality tripod with a stylish design. On the one hand, the folding buttons, so that you can disassemble the tripod in seconds, and on the other hand the low weight and (when folded up) small dimensions are advantageous. Sometimes I used the tripod as a holder for my lights and sometimes for long exposures with my camera. For me it is an all-rounder that you can take with you everywhere thanks to the bag.

Good for the Value multi-function, great choice

As a professional outdoor photographer, I was hoping this lightweight, multi-function pod would fit into the quiver. It didn't. Instead on maybe the fifth or sixth use, while deep in a heavily forested canyon on the Oregon coast, some silly little ring broke and made it so the leg wouldn't telescope back in. I had to hike all the way out with the thing catching on every vine and branch. When I contacted seller I was hopeful of resolving the issue. Then weeks went by with no further contact. So it would appear I'm left with a bipod, utterly useless to me. shop elsewhere!

This multi-function unit is incredibly versatile, since you can use it as a handheld stick or as a standalone adjustable tripod. Very solid build quality as well. It's withstood a drop or two with no problems. Highly recommended for content creators who are looking for an affordable and portable multifunction option.

Great low cost solution for a sturdy, multi-feature tripod.

The device does what it is supposed to do and in absolutely sufficient quality.
The function to create pictures and videos is a nice feature which makes it possible to share the results here. The gooseneck seems quite robust and can be moved by means of a rotating wheel and this function works just super great!

The endoscope comes in a fairly sturdy box with a fairly thin molded plastic shell.
The device itself is really wonderfully intuitive to use.
The swivel head is easy to operate mechanically via the handle. The LEDs are controllable in 3 brightness levels (and off). Optionally, you can also download the APP "Smart Endoscope" on smartphone and connect to the endoscope via Wlan and display on the phone . The advantage, however, is that the endoscope does not necessarily need an additional device.

A nice feature is the temperature sensor in the camera head, which already gets quite warm due to the LEDs, but of course can quickly show high temperatures.
The device makes a stable and high-quality impression and delivers impressively good images with a very wide focus range.
The LED illumination is bright and you can see everything very well and record it easily. Camera and display quality are very good
The probe is waterproof. With a range of motion of 210°, you get a comprehensive impression of the interior.
All in all, a nicely compact, self-sufficient endoscope with swivel head at a rather proud price, considering the pure USB or WLAN endoscopes.

The operation of the swivel is very simple and can be operated with one finger on the handle. Clear buy recommendation from me...