For a long time I was looking for a travel tripod that is compact and handy. Whenever hiking or holiday tours were announced, I had to fall back on my Nanomax 400T. Unfortunately, this is just as high as German bridge railings at maximum height. After some time I came across the TM2324. Short preliminary conclusion: The processing is very good. The tripod is trimmed for photo tours. Thanks to the light 1.3 kg and quick-release fasteners on the legs, it can be taken anywhere and set up super quickly. The ball head with panorama function runs smoothly and feels secure. Details: 1. Key data: The tripod is 47 cm long when folded. If you set it up you can reach a maximum height of 159 cm (at the quick release plate), which is significantly higher than German bridge railings. The weight I measured was 1.31 kg with the ball head and 1.05 kg without the ball head. Despite the tripod, a lot still fits in the case. 2. Ball head: The ball head not only has the actual ball head function, but also a panorama function. The larger wheel releases the ball head. This runs smoothly and can also be swiveled downwards by 90° at one point. The smaller wheel is used for the panorama function. This runs just as smoothly and, as the name suggests, enables panoramic shots, since only the vertical axis is released. If you just crop images you lose resolution (if the focal length allows it at all). If you use the built-in panorama functions, you actually get a higher resolution. 3. Quick release plate: The quick release plate and holder are made of plastic. In this way, a little weight could probably be saved here as well. The plastic looks very valuable and stable. At first glance I thought it was metal. A spirit level or dragonfly is installed in the recording, so you can align the camera straight in the field. 4. Central plate: The feet can be locked in 3 positions with snap hooks on the central plate. Although the clamps feel somewhat "loose", the legs are surprisingly well fixed in the locked position. The middle bar is held by a classic twist lock. 5. Tripod legs: The tripod legs are equipped with quick-release fasteners. They look solid and are particularly useful when you're on the go and don't want to screw forever before you can pull out the leg and then screw it back on. With the quick-release fasteners, this can be done in a few seconds. The tubes themselves are made of black, brushed aluminum. I found no iron or steel on the legs. So nothing can rust if the tripod is placed in a stream or in the sea. One of the legs is partially covered with foam. You can carry the tripod well on it. It's so much more pleasant, especially when it's minus degrees. 6. Bag: The bag looks well made and is of course precisely adapted to the tripod. You can either carry it by the handle or hook it into the included strap. A reflective strip should probably serve to make you better seen by drivers on night hikes. Although I never really carry my tripods in bags, I find them quite successful. As you can see the weather has been bad for a long time but I didn't want to deprive you of my experience. As soon as the weather gets better I will try to send some more pictures later. I bought and paid for the K&F Concept TM2324 as usual via Amazon, but I get the money refunded as a product tester. As always, my opinion remains independent and honest.

My new tripod finally arrived yesterday. Today you need better and better equipment, even in hobby photography. So after much deliberation I bought this K&F tripod. My old tripod was very shaky, not to mention the tripod quick-release plate. This tripod is very robust and I really recommend it as it can be one of the best in this price range. Especially the low height due to the adjustable legs allows you to take pictures very close to the ground. This is a great advantage, especially in nature, because you can find the best angle for photos and get a great insight. Ultimately, there is not much to say, because it does its job completely and you really get a great tripod for the price. The quick-release plate is used by many manufacturers and can therefore be used universally. Even with my relatively heavy DSLR, which weighs almost 2 kg depending on the lens, the camera always stands very firmly on it and nothing blurs. Even when shooting I could not find anything negative about the tripod. So for my Sony Alpha it's a great companion for long exposures and films. Thanks to its low weight, you can take it with you on trips and thanks to its compact design, it fits into any backpack. What you can also say is that the tripod comes with a super stable transport bag so that the tripod arrives safely. All in all, this tripod is ideal for photography and filming.

The tripod itself does what it should. It's stable, it's straight, the quick release plate holds up well and is Arca Swiss compatible, the ball head holds the camera in place and everything feels quite valuable.

This is a very nice travel tripod. I always get backpacks with loops to hold a small tripod, but all the small tripods I've had have been flimsy and not worth lugging around. All my good tripods are too big for it. This now fills this gap.

It's very strong. When I first stretched the legs, I had to pull on them a bit to get them out, but once I freed them, they slid smoothly.

They rotate all the way around and the maximum angle locks in place with a knob.

The upper arm extends upwards with 2 segments, and each leg has 5 segments. This is a great tripod to take with you, but if you need to deploy it quickly it might frustrate you. It takes a good minute to deploy fully if you know what you're doing.

It comes with a ball head and a quick release plate. The ball head glides smoothly and has a compass and spirit level on top to ensure you have a perfect picture setup. The ball head can also rotate, which feels like a fluid head on the bottom. Simple pans are easy, but you have to rotate the camera instead of holding a grip. The quick release plate is locked with a knurled screw. You can loosen the screw and slide it back and forth a bit, but it hits a stop without your camera slipping and falling to the ground. It's a fairly small quick release plate, but it's pretty strong.

It has a nice steel hook at the bottom where you can attach a sandbag if you want to shoot in the wind.

Overall this is a great kit that comes with the tripod, a ball head and a quick release plate. It has everything you need except the camera.

Highly recommended.

This is a step up from the many cheaper quick release plates on Amazon. It is beautifully constructed with moulded safety catches to prevent the plate from sliding off an arca swiss style quick release clamp.

I have it permanently fixed to a heavy 300mm zoom lens and bought it for use with a K&F ball head but have found that it fits all of my other arca swiss clamps too. The only one it doesn’t accommodate is a Sirui clamp which has no recessed grooves for safety catches. I would avoid buying the Sirui clamp altogether and kit yourself out with this style of plate and clamp combination because it is much more versatile, is cheaper, and in this case, just as well constructed.

I've included two photos showing the quick release plate and a K&F ball head. Just look at the build quality.

A fantastic product.

Overall I'm happy with the tripod, at the moment I want to use it for shooting slides. is so big that I can no longer open the battery and memory card compartment on the camera (MFT) and I have to detach the "quick release plate" from the camera every time I change. I have Tried using a small square quick-release plate (like those used on SLR cameras in the past), but the plate mount on the new tripod is a millimeter too small. remains cumbersome (memory card in , screwed quick-change blade,

This is a step up from the many cheaper quick release plates on Amazon. It is beautifully constructed with molded safety latches to prevent the plate from slipping off an Arca-Swiss quick release clamp. I mounted it tightly to a heavy 300mm zoom lens and bought it to use with a K&F ball head, but have found it fits all my other Arca Swiss clamps as well. The only one it can't accommodate is a Sirui clamp, which doesn't have recessed grooves for security latches. I would avoid buying the Sirui clamp whole and stock up on this type of plate and clamp combo as it is much more versatile, cheaper and in this case just as well constructed. I have attached two photos showing the quick release plate and a K&F ball head. Just look at the build quality. A fantastic product.

Today I would like to report on the K&F Concept tripod. When making the purchase decision, it was important to me to be able to photograph at eye level and to have a portable tripod. The tripod can be extended up to a height of 177 cm. And therefore perfect for my project.Packaging: The tripod comes in a transport bag with a strap. This is adjustable in size and can therefore be individually adapted to your own body shape. The first impression was great. The tripod does not have much play in the transport backpack. Here 2cm more would not have been so bad. So it is always a bit of work to get the tripod in well. But I usually carry it loosely on my backpack anyway and the transport bag is only interesting for me for storing the tripod. Processing: I was totally enthusiastic here. For the small budget I get a tripod made of aluminum that makes a very high-quality impression. Everything fits, nothing wobbles. The clamps are made of "high quality" plastic. The weight of 1.72 kg is also ideal for traveling and hiking. Therefore a good companion for me as a woman.More: The legs are 4-way adjustable. Here I open a clamp and the leg extends to the next level. I can also stop it halfway and fix it before the next clamp. That's great. The integrated spirit level also shows me directly whether the tripod is level. I didn't expect that for the small budget, but I think it's very good. A carrying holder is also attached. This sometimes slides very high. But it has been tested and is rock solid. So I can also easily change the tripod. The camera is bombproof. Important: Please do not screw the camera directly onto the standing tripod, but remove the quick-release plate (with a click) and screw the quick-release plate onto the camera. It's much easier. The small nub on the quick-release plate then also moves back. The other reviewers didn't understand the handling in my eyes. There is no faulty production here. When the camera is in place, I can easily adjust the tripod at the front, and the height can also be easily varied with a tripod. The inclination can also be adjusted with the handle. Nothing wobbles, it sits. For pictures in portrait format you only have to operate a handle and the quick-release plate with system can be tilted. You can also hang a weight on the center column, this has not been necessary on my tours so far. But it also looks stable. I particularly liked the foot ends, they can be tilted. Great for working on rocky ground and still having a straight tripod. Conclusion: All in all, highly recommended. The tripod is unbeatable for the price in my opinion. Stable, works. Small disadvantage: Only mediocre suitable for the beach. But I think that affects some tripods. The sand then smears the frame and unsightly scratches occur. Small disadvantage: only moderately suitable for the beach. But I think that affects some tripods. The sand then smears the frame and unsightly scratches occur. Small disadvantage: only moderately suitable for the beach. But I think that affects some tripods. The sand then smears the frame and unsightly scratches occur.