For a long time I was looking for a travel tripod that is compact and handy. Whenever hiking or holiday tours were announced, I had to fall back on my Nanomax 400T. Unfortunately, this is just as high as German bridge railings at maximum height. After some time I came across the TM2324. Short preliminary conclusion: The processing is very good. The tripod is trimmed for photo tours. Thanks to the light 1.3 kg and quick-release fasteners on the legs, it can be taken anywhere and set up super quickly. The ball head with panorama function runs smoothly and feels secure. Details: 1. Key data: The tripod is 47 cm long when folded. If you set it up you can reach a maximum height of 159 cm (at the quick release plate), which is significantly higher than German bridge railings. The weight I measured was 1.31 kg with the ball head and 1.05 kg without the ball head. Despite the tripod, a lot still fits in the case. 2. Ball head: The ball head not only has the actual ball head function, but also a panorama function. The larger wheel releases the ball head. This runs smoothly and can also be swiveled downwards by 90° at one point. The smaller wheel is used for the panorama function. This runs just as smoothly and, as the name suggests, enables panoramic shots, since only the vertical axis is released. If you just crop images you lose resolution (if the focal length allows it at all). If you use the built-in panorama functions, you actually get a higher resolution. 3. Quick release plate: The quick release plate and holder are made of plastic. In this way, a little weight could probably be saved here as well. The plastic looks very valuable and stable. At first glance I thought it was metal. A spirit level or dragonfly is installed in the recording, so you can align the camera straight in the field. 4. Central plate: The feet can be locked in 3 positions with snap hooks on the central plate. Although the clamps feel somewhat "loose", the legs are surprisingly well fixed in the locked position. The middle bar is held by a classic twist lock. 5. Tripod legs: The tripod legs are equipped with quick-release fasteners. They look solid and are particularly useful when you're on the go and don't want to screw forever before you can pull out the leg and then screw it back on. With the quick-release fasteners, this can be done in a few seconds. The tubes themselves are made of black, brushed aluminum. I found no iron or steel on the legs. So nothing can rust if the tripod is placed in a stream or in the sea. One of the legs is partially covered with foam. You can carry the tripod well on it. It's so much more pleasant, especially when it's minus degrees. 6. Bag: The bag looks well made and is of course precisely adapted to the tripod. You can either carry it by the handle or hook it into the included strap. A reflective strip should probably serve to make you better seen by drivers on night hikes. Although I never really carry my tripods in bags, I find them quite successful. As you can see the weather has been bad for a long time but I didn't want to deprive you of my experience. As soon as the weather gets better I will try to send some more pictures later. I bought and paid for the K&F Concept TM2324 as usual via Amazon, but I get the money refunded as a product tester. As always, my opinion remains independent and honest.

For a long time I was looking for a travel tripod that is compact and handy. Whenever hiking or holiday tours were announced, I had to fall back on my Nanomax 400T. Unfortunately, this is just as high as German bridge railings at maximum height. After some time I came across the TM2324. Short preliminary conclusion: The workmanship is very good. The tripod is trimmed for photo tours. Thanks to the light 1.3 kg and quick-release fasteners on the legs, it can be taken anywhere and set up super quickly. The ball head with panoramic function runs smoothly and feels secure.Details:1. Key data: The tripod is 47 cm long when folded. If you set it up you can reach a maximum height of 159 cm (at the quick release plate), which is significantly higher than German bridge railings. The weight I measured was 1.31 kg with the ball head and 1.05 kg without the ball head. So, despite the tripod, a lot still fits in the case.2. Ball head: The ball head not only has the actual ball head function, but also a panorama function. The larger wheel releases the ball head. This runs smoothly and can also be swiveled downwards by 90° at one point. The smaller wheel is used for the panorama function. This runs just as smoothly and, as the name suggests, enables panoramic shots, since only the vertical axis is released. If you just crop images you lose resolution (if the focal length allows it at all). If you use the built-in panorama functions, you actually get a higher resolution.3. Quick release plate: The quick release plate and holder are made of plastic. In this way, a little weight could probably be saved here as well. The plastic looks very valuable and stable. At first glance I thought it was metal. A spirit level or dragonfly is installed in the recording, so you can align the camera nicely even in the field.4. Central plate: The feet can be locked in 3 positions with snap hooks on the central plate. Although the clamps feel somewhat "loose", the legs are surprisingly well fixed in the locked position. The center bar is held by a classic twist lock.5. Tripod legs: The tripod legs are equipped with quick-release fasteners. They look solid and are particularly useful when you're on the go and don't want to screw forever before you can pull out the leg and then screw it back on. With the quick-release fasteners, this can be done in a few seconds. The tubes themselves are made of black, brushed aluminum. I found no iron or steel on the legs. So nothing can rust if the tripod is placed in a stream or in the sea. One of the legs is partially covered with foam. You can carry the tripod well on it. It's so much more pleasant, especially at minus degrees.6. Bag: The bag looks well made and is of course exactly adapted to the tripod. You can either carry it by the handle or hook it into the included strap. A reflective strip should probably serve to make you better seen by drivers on night hikes. Although I never really carry my tripods in bags, I find them quite successful. As you can see the weather has been bad for a long time but I didn't want to deprive you of my experience. As soon as the weather gets better, I'll try to submit a few more pictures. I bought and paid for the K&F Concept TM2324 as usual via Amazon, but I'll get the money refunded as a product tester. As always, my opinion remains independent and honest.

Well, I only buy things if I absolutely need them.

►What do you get?
In the box there is a nice carrying case, the tripod and the quick release.

Personally, I use the tripod the most and when I have to create content for social media, I also use the quick release for my phone.

►How bright is the tripod?

Compared to what I've used so far, it's very light. I would definitely recommend it especially for travellers, at 1.33kg it's wow! !

►What is carbon on this tripod?
The tubes, the rest is good quality aluminum.

►The head?
When you see if, for the first time, it may seem small to you, but from what I've experienced, it does a good job. It goes 360° and has a marking all around, which is very useful, especially for panoramas or large landscapes.

It really helps me when I need to shoot from a specific angle and then I turn my head to get a different angle and literally take a picture of the angle where the camera was positioned before. That way I don't have to worry about getting a different angle.
The head plate is decorated with a nice rubber logo that will prevent your camera from slipping.
The lock works very well. When I move my camera almost 3kg in portrait mode all the weight goes to one side and when I lock the head it literally stays where I wanted it to. Head rotation is smooth, no problem to interrupt your smooth video.

►The central part of the tripod?
The lock which is located in the middle is easy to access and loosen or lock.
There is also the wheel lock with rubber on the top which will allow you to make the tripod higher. I strongly suggest locking it properly to prevent your camera from sliding down.

►The legs?
These have 4 sections and will allow you to go very precisely with the pitch.
The best part is that when you open them they slide out very quickly so you don't have to pull them, for me it saves a lot of time which I always do I unlock all 3 legs of all sections and just let them open. Also, when you adjust the height, the legs are very smooth.
At the bottom they have a good solid rubber that will prevent the tripod from slipping. I mainly use it in the kitchen where I'm filming a cooking show and the tripod stays in place on the tiles. For this, also use a backpack of about 5-7 kg inside to stabilize it properly. There is a hook that you use to attach things (like in my case the backpack for extra stability).


For what I use, it's great. Now I can't say anything about hiking where the wind might be an issue.
I use it strictly in the kitchen and move it around a lot to capture different angles.

►Why did I buy this one over others?
It is very simple, because it is light and compact. Sometimes I have to go to my clients for food shots and I have to take the gear with me and I wanted something that saves me weight and size. This tripod is what I needed.

►The quick release?
Well built and good looking too, I would say use it more with phones. It's very handy to have it around and I consider a good addition is that you get it with the tripod.

►The carrying case?
Attractive ! You can easily install the tripod (folded correctly) and maybe some other small equipment, there is still space.

►Overall experience on this subject?
I was a little surprised at how light and compact it is. Easy to use and stable enough for my static setup and the 3kg camera I use the most.

►The disadvantages? I haven't found any so far.

Looking for a light and compact tripod for organizing a trip, I came across this one, barely 1kg300 for 38cm folded. It also carries the possibility of making a monopod very quickly, which will be interesting to capture an image in a place where the tripod would not have been possible.

For this small build, the tripod is very solid, since it easily supports the weight of my 6d mark ii with its grip and its two batteries + a sigma 70-200. (even with the articulated arm deployed).

The legs of the tripod have 5 sections, which allows it to go from around 35cm to 155cm and the central column can be reversed to allow the device to be placed at ground level!

It comes with a carrying bag, an extension for the monoball monopod, a ball head with an "arca swiss" type quick plate which allows the lens to be attached directly to the ball head without using the quick plate (see photo 4).

In conclusion, a purchase that I do not regret and which for its price is more than qualitative.

This is a very nice travel tripod. I always get backpacks with loops to hold a small tripod, but all the small tripods I've had have been flimsy and not worth lugging around. All my good tripods are too big for it. This now fills this gap.

It's very strong. When I first stretched the legs, I had to pull on them a bit to get them out, but once I freed them, they slid smoothly.

They rotate all the way around and the maximum angle locks in place with a knob.

The upper arm extends upwards with 2 segments, and each leg has 5 segments. This is a great tripod to take with you, but if you need to deploy it quickly it might frustrate you. It takes a good minute to deploy fully if you know what you're doing.

It comes with a ball head and a quick release plate. The ball head glides smoothly and has a compass and spirit level on top to ensure you have a perfect picture setup. The ball head can also rotate, which feels like a fluid head on the bottom. Simple pans are easy, but you have to rotate the camera instead of holding a grip. The quick release plate is locked with a knurled screw. You can loosen the screw and slide it back and forth a bit, but it hits a stop without your camera slipping and falling to the ground. It's a fairly small quick release plate, but it's pretty strong.

It has a nice steel hook at the bottom where you can attach a sandbag if you want to shoot in the wind.

Overall this is a great kit that comes with the tripod, a ball head and a quick release plate. It has everything you need except the camera.

Highly recommended.

This is a very nice travel tripod. I always get backpacks with loops to hold a small tripod, but all the small tripods I've had were flimsy, and not worth hauling around. All of my good tripods are too big for that purpose. This one now fills that void.

It's very strong. When extending the legs for the first time, I did have to yank it a bit to get them out, but after I freed them they slid smoothly.

They rotate all the way around and the maximum angle locks in with a button.

The top arm extends up with 2 segments, and each leg has 5 segments. This is a great tripod to carry around, but if you need to deploy it quickly, it might frustrate you. It takes a good minute to fully deploy if you know what you're doing.

It comes with a ball head and a quick release plate. The ball head glides smoothly, and has a compass and spirit level attached to the top to ensure you have perfect framing. The ball head also can rotate with what feels like a fluid head swivel on the bottom. Simple pans are easy, but you have to twist the camera instead of holding a handle. The quick release plate locks down with a thumb screw. You can loosen the screw and slide it back and forth a small amount, but it hits a stop without letting your camera slide off and fall to the ground. It's a fairly small quick release plate, but it's fairly strong.

It has a nice steel hook on the bottom that you can attach a sand bag to, for if you plan on shooting in the wind.

Overall this is a great kit that comes with the tripod, a ball head, and a quick release plate. It has everything you need besides the camera.

Highly recommended.

at the top used as tripods in portrait mode or perfect tilt monopod, everything is good and yet I have several other brands but this is the one that is the most versatile and transportable.

This is a very nice travel tripod. I always get backpacks with loops to hold a small tripod, but all the small tripods I've had were flimsy, and not worth hauling around. All of my good tripods are too big for that purpose. This one now fills that void.It's very strong. When extending the legs for the first time, I did have to yank it a bit to get them out, but after I freed them they slid smoothly.They rotate all the way around and the maximum angle locks in with a button.The top arm extends up with 2 segments, and each leg has 5 segments. This is a great tripod to carry around, but if you need to deploy it quickly, it might frustrate you. It takes a good minute to fully deploy if you know what you're doing.It comes with a ball head and a quick release plate. The ball head glides smoothly, and has a compass and spirit level attached to the top to ensure you have perfect framing. The ball head also can rotate with what feels like a fluid head swivel on the bottom. Simple pans are easy, but you have to twist the camera instead of holding a handle. The quick release plate locks down with a thumb screw. You can loosen the screw and slide it back and forth a small amount, but it hits a stop without letting your camera slide off and fall to the ground. It's a fairly small quick release plate, but it's fairly strong.It has a nice steel hook on the bottom that you can attach a sand bag to, for if you plan on shooting in the wind.Overall this is a great kit that comes with the tripod, a ball head, and a quick release plate. It has everything you need besides the camera.Highly recommended.