The adapter has a premium feel, snaps firmly into my Fuji camera and holds the lens securely and securely. After I read that for old lenses with a screw thread it is better to buy a separate adapter for each lens, I will order this one again!

I used this adapter with a Fuji XM1 and a Nikon 50mm lens. I had no problem connecting the adapter to the camera and the lens to the adapter. It is possible to adjust the opening of the membrane. Excellent value for money.

Nikkor lens adapter on a Fuji X body, works very well, it's a tight fit and the aperture ring is pretty functional. Obviously, all automatisms have been lost, i.e. only manual fire and manual diaphragm adjustment. For the price it's a great product.

bought this adapter to (re)use my fleet of Sony A-mount lenses on my Fuji X-S10. This ring is perfectly adapted to this function, I can use my Minolta and Sony lenses without any problems (by manual of course!). In addition, the perceived quality is excellent.

To mount a Voighlander Leica M lens on a Fuji X E3, very good manual coupling card but a bit thick but that was on the announcement and it could be the optical pressure. So very satisfied.

Perfect service

My old Nikkor lenses fit perfectly in Fuji's x-mount and work just as well. The construction of the adapter is excellent and paired without problems, even my 16-85 zoom for apsc SLR (obviously without automatisms and autofocus).

had bought a Fuji X-T10 mirrorless camera and was waiting for a Fuji lens to arrive so I could use it. I had a Nikon 35mm g at home and I was thinking about using it on my Fuji while waiting for the proprietary lens. After careful research I have ordered this wonderful adapter which I will try to describe below. It arrived in a small cardboard box wrapped in shockproof plastic. The adapter is made of excellent material, it is made entirely of metal and is pleasing to the eye. It can be installed easily and quickly on both sides. It has a metal ring that is used to close and open the membrane. That last feature deserves an explanation: the adapter has no electrical contacts, so any lens you mount will lose autofocus. If you mount a lens that is equipped with an aperture ring, you can use it without any problems because the adapter does not interfere with this ring. On the other hand, if you mount a lens without an aperture ring, as in my case, you can have trouble selecting the apertures that the mirrorless camera actually no longer shows on the display. However, this adapter features a ring for minimal control of the diaphragms. To get the best out of it, before mounting the lens, make sure the adapter ring is fully closed (smaller ball), then mount the lens. Then mount the adapter on the camera. In the case of the XT-10, I had to select non-lens speech noise from the settings menu and that was it. Despite the lack of autofocus and minimal control over the apertures, I took wonderful photos. Highly recommended for those who are already experts at manual focusing.