I have a small carbon fibre tripod that I like to take on most trips, but wanted this for use at home, in town, and for trips to the mountains. There are several features I love about this tripod and it makes it unique even though I already own two other tripods.

First off, I am 6'5, so I love the fact that this tripod can be taken out far past my height. I plan to even use it for uniques shots from above since I can trigger my shutter with an app (I normally use a Sony A7RIII..a Canon 5D Mark III is in the photo).

Secondly, the monopod feature is awesome. You just unscrew a leg and where the pole with the head attaches and you screw them together. I have wanted a monopod that could handle some weight and this fills that need.

Thirdly, and the main reason I wanted it, is that it can be used for overhead shots (my attached photo has a quick example of how that works..sorry for the old iPhone pic quality). I review tech equipment on occasion for Youtube and this allows my iPhone or Canon to be used for overhead shots, while I use the Sony for front facing video on one of my less capable tripods.

I guess the only thing I don't know now is how well it will hold up, but I will update if I have any issues. I also want to note that my girlfriend liked the looks of it. I guess the orange parts of the tripod are attractive compared to the typical all black stylings of my other tripods.

All in all, this fills so many needs for my normal home use that my travel tripod can typically just stay in the case.

I have a small carbon fibre tripod that I like to take on most trips, but wanted this for use at home, in town, and for trips to the mountains. There are several features I love about this tripod and it makes it unique even though I already own two other tripods.First off, I am 6'5, so I love the fact that this tripod can be taken out far past my height. I plan to even use it for uniques shots from above since I can trigger my shutter with an app (I normally use a Sony A7RIII..a Canon 5D Mark III is in the photo).Secondly, the monopod feature is awesome. You just unscrew a leg and where the pole with the head attaches and you screw them together. I have wanted a monopod that could handle some weight and this fills that need.Thirdly, and the main reason I wanted it, is that it can be used for overhead shots (my attached photo has a quick example of how that works..sorry for the old iPhone pic quality). I review tech equipment on occasion for Youtube and this allows my iPhone or Canon to be used for overhead shots, while I use the Sony for front facing video on one of my less capable tripods.I guess the only thing I don't know now is how well it will hold up, but I will update if I have any issues. I also want to note that my girlfriend liked the looks of it. I guess the orange parts of the tripod are attractive compared to the typical all black stylings of my other tripods.All in all, this fills so many needs for my normal home use that my travel tripod can typically just stay in the case.

K& F concept aluminium tripod with 180 degree tiltover camera head

Summery: Lightweight, sturdy, the tiltover head gives a special feature I wanted.

I own quite a few tripods and camera mounts because I have so many cameras so this one joins my collection for a special reason which I will explain in a short while.

The model is KF-TM2515T

It has 4 part telescopic legs that extend to a give a maximum tripod height of 6o inches, the legs can be used in 3 different angle positions which is adjusted using the red button at the top of each leg, there is no central connector so each leg angle can be set individually.

The centre column is in 2 parts, the outer part can be height adjusted while the second section can not only be extended vertically but it can also be tilted over 180 degrees, it was this feature that made me decide to add this to my collection, more on that in a while.
As with a lot of tripods you can invert the centre column to allow low level and macro shooting, but the tillable section adds a little extension to give a different view than one bound to the centre, you can even make an ad-hoc slider shot by slowly moving the bar along the centre column.

The tripod head is a standard 3/8 thread panning ball-head type that are found on many of my tripods, I like ball-heads for my smaller cameras. It has an Arca-Swiss type quick release clamp with a bubble for camera levelling.

The tripod is lightweight, strong, it folds down pretty small and comes with a strong looking zipped case with straps so for general purpose use it is great, with the added tilt feature to give some extra creative assistance.

Now the reason I bought this particular tripod…..I need to be able to mount 2 cameras on one tripod properly, and this tripod helps me do just that with a little bit of extra kit.
The end of the centre bar has a small plastic cap screwed into it, when taken away a 3/8 thread is revealed, most of my tripod centre column have this, it is usually there to hold the sandbag hook screw. So by using a short 3/8 inch threaded bar and an extra ball-head I can make a double tripod. Fantastic and very useful to save space when shooting.

One leg can also be removed and used with the centre column as a monopod but I already have monopods so I will not be using that feature with this tripod.

I attach cameras to the bracket.I found out my two cameras CANNOT be tighten to the adapter.As if the screw is too long.What gives?Are all tripods like that ?Or defect? Other then that nice tripod.

It has no ports but I can still use Canon lenses on NX cameras... Can enjoy different angles.

Yes... it works perfectly with Canon EOS M cameras. I own Canon EOS M10 and use this adapter most of the time with Canon 50mm 1.8 lens. It is amazing. The autofocus is accurate and fast enough. If you own a Canon EOS M camera, I recommend you this adapter because it is much cheaper than Canon original and there is actually no difference between them. Everything works as it should. I love this adaptor. The best purchase I've made for my camera.

In no way inferior to the Canon original. The only annoying thing is the non-removable mount at the bottom, which is made for mounting on tripods. It feels a bit weird at first, but I personally got used to it over time. The processing quality is good and robust, I've had 2 of them for almost 2 years and they are still in perfect condition. Costs far less than Canon's original and makes only minimal compromises! Excellent!

I have 2 cameras and several lenses, power supplies and 2 tripods, I also have a computerised mount for astrophotography. It All fit! As we know it is the horizon that can make or break a "star show" this will allow me to travel off the beaten trail for those "places" of wonder.As far as cons... well if you need speed to get your camera out the front pack can accommodate this. it is a bit bulky for action shots however if you landscape its good for one of the smaller wide angle lenses, diameter is limiting however, and fits my Nikon with a mounted lens quite nicely.