I like this bag, perfect fit for all my camera and lens items

I like this bag, perfect for all my camera and lens stuff

This K&F DSLR hand strap is a great fit for a lighter DSLR, mirrorless SLR or P&S if you want to travel light. The quality of the strap is decent, as is the clip. The strap also looks good and doesn't look cheap. The current price of $40-10 = $30.00 CAD is pretty good and cheaper than some other brands.

Yes, it fits perfectly on my Samsung Nx 3000 mirrorless camera and Canon lenses have no problem even if there are no more automatisms.

already had rings to use Canon FD lenses on my Mirrorless Samsung NX30 but I wasn't entirely happy with them... on a friend's suggestion I wanted to try them and I have to say that from a constructive point of view they are really well done . No mechanical play, the lens is firmly attached to both the ring and the camera body and not even the stop-down ring of the apertures (which allows you to set the aperture to the desired value) remains locked in the selected position. We recommend!!! Top shipping service (as always)...!

That's the nice thing about modern mirrorless system cameras: You can continue to use older lenses that were intended for analogue SLRs by connecting them to the camera using a manual adapter. This works very well, you even have a preselection aperture facility, ie you only set the aperture on the lens, only when you take the picture do you turn the aperture locking ring on the adapter to the position - very helpful. I can only recommend using "old" analog lenses on the new mirrorless ones! I bought a Canon FD 50mm macro, an FD 100mm macro, an FD 35-70 and an FD 80-200 for a few euros and I am extremely satisfied with the image quality on the 61 MP sensor of my Sigma FP L, even with 100% view on the monitor. The lenses mentioned are sharp to the edge. This turns out to be a myth that analog lenses cannot be used digitally because the resolution of these lenses is too low. I can definitely recommend the K&F adapter. It is precisely manufactured and slides smoothly into the camera's bayonet.

Use this as a webcam tripod for my DSLR. The minimum height might be a bit high, but it allows you to reverse the orientation of the mount and have a more grounded viewing angle

Use this as a webcam tripod for my DSLR. Minimum height may be a bit tall but it does allow you to flip the mount orientation and have a more grounded vantage point