Perfect Yashica lens adapter for my Canon 1200D! I would recommend it to anyone who wants to use the old analog camera lenses on their SLR.

Yes, it fits perfectly on my Samsung Nx 3000 mirrorless camera and Canon lenses have no problem even if there are no more automatisms.

That's the nice thing about modern mirrorless system cameras: You can continue to use older lenses that were intended for analogue SLRs by connecting them to the camera using a manual adapter. This works very well, you even have a preselection aperture facility, ie you only set the aperture on the lens, only when you take the picture do you turn the aperture locking ring on the adapter to the position - very helpful. I can only recommend using "old" analog lenses on the new mirrorless ones! I bought a Canon FD 50mm macro, an FD 100mm macro, an FD 35-70 and an FD 80-200 for a few euros and I am extremely satisfied with the image quality on the 61 MP sensor of my Sigma FP L, even with 100% view on the monitor. The lenses mentioned are sharp to the edge. This turns out to be a myth that analog lenses cannot be used digitally because the resolution of these lenses is too low. I can definitely recommend the K&F adapter. It is precisely manufactured and slides smoothly into the camera's bayonet.

This adapter opens the lens of my Leica camera with a Canon lens

The lens adapter is used by me to use high quality Nikon lenses on a Canon EOS M camera. The adapter is of high quality, the handy metal ring allows manual adjustment of the aperture. Note: electronic transmission of the lens data or the autofocus is not possible with this adapter!

had bought a Fuji X-T10 mirrorless camera and was waiting for a Fuji lens to arrive so I could use it. I had a Nikon 35mm g at home and I was thinking about using it on my Fuji while waiting for the proprietary lens. After careful research I have ordered this wonderful adapter which I will try to describe below. It arrived in a small cardboard box wrapped in shockproof plastic. The adapter is made of excellent material, it is made entirely of metal and is pleasing to the eye. It can be installed easily and quickly on both sides. It has a metal ring that is used to close and open the membrane. That last feature deserves an explanation: the adapter has no electrical contacts, so any lens you mount will lose autofocus. If you mount a lens that is equipped with an aperture ring, you can use it without any problems because the adapter does not interfere with this ring. On the other hand, if you mount a lens without an aperture ring, as in my case, you can have trouble selecting the apertures that the mirrorless camera actually no longer shows on the display. However, this adapter features a ring for minimal control of the diaphragms. To get the best out of it, before mounting the lens, make sure the adapter ring is fully closed (smaller ball), then mount the lens. Then mount the adapter on the camera. In the case of the XT-10, I had to select non-lens speech noise from the settings menu and that was it. Despite the lack of autofocus and minimal control over the apertures, I took wonderful photos. Highly recommended for those who are already experts at manual focusing.

The product meets my needs to serve as an adapter from a Nikon lens to my Canon camera. The only problem has been that I had to do a lot of research to make sure the lens worked. In the product description they are not too specific. Otherwise perfect and received within 12 hours of ordering

I still had two prime lenses from my film camera, a 28mm and a 50mm with filters. The adapter works fine, I've attached a photo (the one with the flowers) I took with it and the 28mm lens. It focuses to infinity and the sharpness is ok (UV filter was on). Focus and aperture must of course be set manually. But you have to make sure to set the adapter to "Close", otherwise the lens remains open, you cannot adjust the aperture and light comes through. I use this sometimes to create a "soft glow" effect like in the photo with the sofa.