bought a FujiFilm camera. It's difficult to buy lenses. I bought an adapter to use a Nikon lens. It has an aperture ring, so I shoot in A mode. Of course, it can also be used in S mode. I don't use M mode. It is very helpful when it is difficult to buy real lenses. Thanks very much.

have a Fujifilm X-T200 and my mom had some old Canon lenses. So I figured why not get the adapter. The lenses and adapter snap together easily, feel sturdy and great. After figuring out how to adjust my camera settings, I was able to take photos. If you are also struggling with this, I recommend checking out the company's website. I clicked on the adapter I bought and they had instructions on how to set up your camera to use those vintage lenses.

Great product, solid and precise. I mounted old Canon FD lenses on my Fujifilm XT5 and the result was excellent. The only flaw is the case, beautiful as it is in my opinion, not functional but easily replaceable.

This adapter opens the lens of my Leica camera with a Canon lens

Since I recently inherited a Nikon FG-20 as well as a Nikon Micro-Nikkor 55mm f/2.8 and a Nikon Series E manual focus zoom 70-210mmf/4.0s, I naturally wanted to use the old lenses on my Canon EOS 600D or EOS 600D Review Canon EOS 760D. But: Nikon on Canon? It is well known that this is not possible without an adapter ring. Novoflex adapters were out of the question for me, because as a hobby photographer and occasional "analogue photographer", I didn't want to spend €100 on such a ring. Nevertheless, I wanted to break THE primal law of photography and combine Nikon and Canon. K&F Concept offered a cheap alternative for just under €20. The adapter ring is surprisingly high-quality and made of metal, and it can also be quickly mounted on the lens and DSLR. I was surprised by the results (see photos) and would not have thought that the two 30-year-olds "harmonize" so wonderfully with my EOS, to put it bluntly. It's a bit "hooky" to detach the adapter ring from the lens again using a tiny little "hook" (if you can call it that...), so the ring gets a star deduction, because it gave me a bit of a panic at first and I'm not sure how long this "hook" will go along with the whole procedure. ! A NOTICE ! You should really inform yourself in detail about the bayonet (connection of the lens) beforehand. Since the two Nikon lenses are both a bit older and were built in a time when people would have laughed about something like the internet in this country, it was a bit difficult to find out exactly (especially as a layman or newcomer to Nikon and analogue photography) whether they both have the same connection and whether I might even have to buy two different rings.

I really like this additional tool for my Fujifilm cameras. It's a wonderful adapter. The photo I sent with this test is of the K&F Concept Lens Mount Adapter used with a Canon 100mm f2.8 macro lens. As you can see, the results are fantastic! Hope that helps :-)

The product meets my needs to serve as an adapter from a Nikon lens to my Canon camera. The only problem has been that I had to do a lot of research to make sure the lens worked. In the product description they are not too specific. Otherwise perfect and received within 12 hours of ordering

I still had two prime lenses from my film camera, a 28mm and a 50mm with filters. The adapter works fine, I've attached a photo (the one with the flowers) I took with it and the 28mm lens. It focuses to infinity and the sharpness is ok (UV filter was on). Focus and aperture must of course be set manually. But you have to make sure to set the adapter to "Close", otherwise the lens remains open, you cannot adjust the aperture and light comes through. I use this sometimes to create a "soft glow" effect like in the photo with the sofa.