have been looking for a tripod for my Canon. I saw an advertisement for the K&F Concept TM2515T1 Professional 67 inch Camera Tripod. I can use it so many different ways. I am so glad that I got this one!

Highest Manufacturing Quality Used to mount Canon FD lenses on a Fuji XT4. I can only recommend this product. Good crafting materials and no modifications.

Ring to adapt Canon FD lenses to EOS R-mount bodies with no electronic contact so no autofocus You have to use the case manually to adjust it. ISO and speed, the aperture is set on the lens

bought three adapters with a Canon R mount (one for Leica R, one for Contax and one for Minolta MD). They all reach exactly infinity. The internal anti-reflective paint is well finished. When I check them with a caliber, the two sides of the adapters appear planar (but I don't have any wide-aperture lenses to test that on). On the camera side, they are all precise and without light leakage. On the optical side, I noticed a slight light infiltration on two adapters. Of course, I purposely searched for them by bringing a 500 lux LED flashlight half a centimeter away from the adapter. Light penetration is very unlikely in normal situations (perhaps on an easel on the beach in August). I solved it anyway with a small rubber grommet. If you're shooting freehand, that's not necessary, the hand is hiding a possible infiltration. Overall they look like good adapters to me. Due to their robustness, they can withstand lenses up to 600/700 grams. However, I would not mount lenses that are larger than one kg on the nose.

In no way inferior to the Canon original. The only annoying thing is the non-removable mount at the bottom, which is made for mounting on tripods. It feels a bit weird at first, but I personally got used to it over time. The processing quality is good and robust, I've had 2 of them for almost 2 years and they are still in perfect condition. Costs far less than Canon's original and makes only minimal compromises! Excellent!

I bought it to mount Nikon F mount lenses on a Canon 5D Mark IV and III body and it fits perfectly with zero slack. As these are manual lenses, there is obviously no autofocus and the diaphragm is closed manually.

If they added a tab that closed and opened the diaphragm it would be 100% perfect.

I have an older, vintage camera tripod that I've been using for several years. It was much more expensive than this one. The K&F Concept 70"/177cm Portable Tripod is just as sturdy and a much better value. For heavier cameras, I always look for the hook at the center of the tripod because sometimes in outdoor conditions, I like to hang a sandbag to make sure it doesn't get blown away by the wind. The legs extend with no issues and there is a bubble level near the camera mount. This is much nicer in quality engineering than I had expected especially due to the smoothness of the moving parts. You can mount your camera very high, so this would work well in environments like auditoriums where you will need a higher perspective. This is much more light than my old one and it comes with it's own nylon storage/carrying bag. Thankfully, it takes the standard 1/4" threading on the mount and they were nice enough to include a cell phone adapter, so it's for versatile use.I find the K&F Concept 70"/177cm Portable Tripod to be a fair to good value. I've seen similar tripods as reviews and they were lacking in engineering and quality of materials. This is a good tripod and I would strongly recommend it to anyone with a heavier camera or equipment.Thanks for reading my review. If you found it helpful, click he Helpful button below.

Hello,
I use the adapter on my EOS 7D Mark II to be able to continue using a couple of analog lenses.
The usability, as in the old days, manual . . .
If you have problems with it, you should keep your hands off it or practice, practice, practice. (nothing is impossible)
If you can handle it, you have a great tool at hand and, like me, can continue to use your old lenses or buy them very cheaply!
The image quality depends on craftsmanship or practice makes perfect.
Of course, everything has to be set manually because there is no communication between the camera and the lens.
If you don't have a stabilizer in your camera like me, you should have a steady hand or use a tripod. . .
If you stop down by two f-stops, the images on both the Canon and the Soligor lenses are crisp!
The adapter is of high quality and makes a solid impression, nothing wobbles and sits perfectly on the camera. (everything made of metal)

I can recommend it, I have fun with it and wish you the same.