Best for the price.
I would buy it again right away.
When I think about what my Manfrotto with ball head cost me before!

K& F concept aluminium tripod with 180 degree tiltover camera head

Summery: Lightweight, sturdy, the tiltover head gives a special feature I wanted.

I own quite a few tripods and camera mounts because I have so many cameras so this one joins my collection for a special reason which I will explain in a short while.

The model is KF-TM2515T

It has 4 part telescopic legs that extend to a give a maximum tripod height of 6o inches, the legs can be used in 3 different angle positions which is adjusted using the red button at the top of each leg, there is no central connector so each leg angle can be set individually.

The centre column is in 2 parts, the outer part can be height adjusted while the second section can not only be extended vertically but it can also be tilted over 180 degrees, it was this feature that made me decide to add this to my collection, more on that in a while.
As with a lot of tripods you can invert the centre column to allow low level and macro shooting, but the tillable section adds a little extension to give a different view than one bound to the centre, you can even make an ad-hoc slider shot by slowly moving the bar along the centre column.

The tripod head is a standard 3/8 thread panning ball-head type that are found on many of my tripods, I like ball-heads for my smaller cameras. It has an Arca-Swiss type quick release clamp with a bubble for camera levelling.

The tripod is lightweight, strong, it folds down pretty small and comes with a strong looking zipped case with straps so for general purpose use it is great, with the added tilt feature to give some extra creative assistance.

Now the reason I bought this particular tripod…..I need to be able to mount 2 cameras on one tripod properly, and this tripod helps me do just that with a little bit of extra kit.
The end of the centre bar has a small plastic cap screwed into it, when taken away a 3/8 thread is revealed, most of my tripod centre column have this, it is usually there to hold the sandbag hook screw. So by using a short 3/8 inch threaded bar and an extra ball-head I can make a double tripod. Fantastic and very useful to save space when shooting.

One leg can also be removed and used with the centre column as a monopod but I already have monopods so I will not be using that feature with this tripod.

K&F Concept Camera Tripod K234A7 + BH-28L + Extension Arm Kits I only uploaded 1 of the 2 videos and preferred the second one in which I explain how and where to put the different parts as the manufacturer includes a slim guide as on the photo shown. Assemble the pieces by looking at the various presentation photos, it would be 4 stars for this particular one but the tripod is worth the 5 stars. The supplied short pole is 30cm long, while the closed stand reaches 50cm. How I use the tripod is very easy to use and see the various reviews for more measurements and opinions on how well it works. Just saying I use it with Tamron 150/600 G2 on Nikon D7200 and Celestron Ultima 80 Spotting Scope both on the head ball that comes with it and the gimbal to replace it but only on a smooth tripod without the extension pole that I use have not tried. Relatively light excellent transport bag with reflective insert and shoulder strap with padded shoulder strap. The head comes with a one-for-all attachment and is of the Arca-Swiss compatible type.

I would say this is the nicest tripod I currently own (and also the most expensive). I am more of a hobbyist than a professional.

This comes in a nicely padded carrying bag. The bag has large metal zippers and a nylon zipper. It open wide to make removal or replacement of the tripod easy. There are no interior or exterior pockets. There is also an adjustable strap so you can carry over your shoulder.
The included instruction manual is pretty basic. There is also an included hex key. I would say if you want to keep this with the tripod you can use some Velcro ties to strap to one of the legs.

I like the height of the monopod at full extension. When I place the ball head on top of this & then my camera, I don't need to bend over at all (I am about 6'2"). If I don't use the head then I need to just slightly bend over when using the view finder. There is also a padded grip in this leg. You can also use this as a hiking stick.

The legs have a few angles of adjustment. The bottom rubber feet are removable. This does not come with different feet so if you want spikes for example for use in dirt / sand you will need to purchase those as none are included. At full height this will tower over a crowd. There is also a hook where you can hang your backpack or weights to help keep this more stable. You can unscrew this so you can then reverse the center shaft to use as a low or macro tripod.

The head is dampened so when rotating you can get a smooth effect if shooting video. You need to be a little careful as the head can unscrew when rotating if you don't have the lock screw loose. This is also my first tripod where you can bring the arm over to shoot off to the side of the tripod. This is really nice being able to stand next to the tripod instead of behind it in some instances.

There is a bubble level on the top of the head. The camera mount does not use the snap quick release which in nice as it does not wiggle & feels more secure when you have the knob tightened. You can purchase additional shoes for this tripod.

I don't find this tripod to be too heavy for my use & do find it to be very versatile & am so far very happy with this tripod.

Great hand strap for my DSLRs or larger mirrorless cameras. I prefer a wrist strap to a neck strap for practical reasons, and this is a good one.

The good sides + Nice design and materials + A good alternative to a neck strap (I personally don't like friction on the collar) + The buckle has an additional button that you have to press to prevent accidental release + The width of the strap is about 2cm, twice as wide as my Pac Safe Carry Safe 25 (which I used on all my cameras), which makes it more comfortable to use than the Pac Safe + Three-level (color-coded) wear indicator on the strap that connects to the camera Nitpicks//Hit or Miss *The reach of my small wrist is about 11 inches. That's pretty long, but it's only about an inch longer than my Pac Safe Carry Safe 25 wrist band Possible Dealbreakers - Wrist bands aren't for everyone. I'm a fan of wrist straps, but I also put my camera back in the carrying case I use when I'm not shooting. - The material of the loops may be too thick to fit into the strap holes of smaller cameras, especially if you do not have a second ring for the strap holes. For comparison, my beloved but discontinued Pac Safe Carry Safe 25 wrist strap used a strong but thin metal wire as a loop that fit into most small strap holes on smaller cameras.

K&F Concept Camera Tripod K234A7 + BH-28L + Extension Arm Kits I only uploaded 1 of the 2 videos and preferred the second one in which I explain how and where to put the different parts as the manufacturer includes a slim guide as on the photo shown. Assemble the pieces by looking at the various presentation photos, it would be 4 stars for this particular one but the tripod is worth the 5 stars. The supplied short pole is 30cm long, while the closed stand reaches 50cm. How I use the tripod is very easy to use and see the various reviews for more measurements and opinions on how well it works. I'm just saying that I use it with Tamron 150/600 G2 on Nikon D7200 and Celestron Ultima 80 spotting scope both on the included head ball and gimbal to replace it but only on a smooth tripod without the extension pole which I haven't tried. Relatively light excellent transport bag with reflective insert and shoulder strap with padded shoulder strap. The head is fitted with an all-mount attachment and is of the Arca-Swiss compatible type.

as a photographer, i do not like straps on my DSLR cameras, nor around my neck, but this strap is great. comfortable and perfect to keep the controller safe.