Polarized Film 300*200mmX4, with a film scraper

See All Description

Reviews (26)

All Reviews
Image
All Star
- All Star
- 5 Star
- 4 Star
- 3 Star
- 2 Star
- 1 Star

Sort by: Most Recent
- Most Recent
- Top Rating

Wayne Burbank

Worked perfectly

Worked perfectly! The LCD display on this bike melted and looked like cooked bacon...scraped off, found the right angle on the new sheet metal and cut and fitted. Both sides protective films, but only one side is sticky. Worked perfectly and can now read the LCD display again!

10/04/2023

Tony Sr.

Worked perfectly to attach the LCD display to the pool pump

My pool pump's LCD display was unreadable. Scraped off all glue and polarizer with a razor and high proof alcohol. Check the polarizer to make sure the correct angle cut is glued on. Boom works perfect looks brand new

06/04/2023

In order

It's easy to use and does what it's supposed to do.

05/04/2023

matthew

Perfect speedometer repair

Perfect for the bacon rolled speedometer pictured (polarized sheet metal). Granted, the original was 16 years old before any problems arose.

03/04/2023

Orich

Good poly filter film

I had ordered the film to replace my burnt out poly filter from the projector. It does exactly what it's supposed to. Thanks to the one-sided adhesive side, it sticks securely to the LCD. It's powerful and tinted enough to protect against the bright LEDs while still polarizing a great image. So everything is great.

03/04/2023

torquilla

Not fully matched in light rejection but good enough for photographers and others it seems.

Not full polarization, but still usable for my purposes. I don't think these are made accurate enough to work on a screen. They also let about 10% of the light through when they are upright. That means they don't work for the classic blackout experiment. They would probably still be useful for photography and lighting. You might want to look for something more expensive if you want impressive performance.

01/04/2023

Christopher Landa

Great!!!!

I used it to invert the colors on my motorcycle counter and the result is great. Before the background was gray with black writing (like an old calculator) and while shooting the film with the timer on I found the perfect compromise (black background with white writing) for the most beautiful effect. It cuts very well and sticks well. Also, delivery was within 24 hours (amazing).

30/03/2023

Good work

This worked fine for me. They block all light that passes through them when two filters are placed at 90 degrees to each other. I'm not sure I like the "sticky" surface that comes automatically to one side of the film, but I'll deal with it. For those who fail to block all light, it is important to note that once light is polarized, it can become unpolarized once it passes through another medium. So if the protective films on the polarizing film are not removed, they will not work properly. The "sticky" side will also only slightly disturb the polarization, so it's important to take this into account in your setup as well.

29/03/2023

Jose

Good size and polarizes well

Very good. It polarizes properly, easy to cut out and glue onto the light bulb and there is plenty left over (after cutting out what is required for a medium sized bulb that I use with my mobile phone). They are two sheets, slightly smaller than the size of a sheet, covered in protective plastic that must be removed before use.

25/03/2023

Craig Haley

Great for the price, but there are some downsides.

It's impossible to get every air bubble out, which may bother some people, but the dark-themed finish looks a lot better. Paper is quite thinner than the original film used on bikes but for the price you can't go wrong. Finally, the sheets have a glossy finish so you get glare from the sun at times, which doesn't bother me, but if it did I'd recommend going for a matte finish.

24/03/2023

... 1/3

FAQs

Why doesn't it work after installation?

Check whether the protective film is torn off before and after lamination, please tear off the protective film before it works.

I bought other polarizing sheets and they were wrinkled when I received them, how do you protect them?

The packaging is equipped with a hard board to ensure that the user receives the product in perfect condition

Bubbles appear after bonding, how to deal with them?

K&F CONCEPT is equipped with dry and wet bag and scraper for users to better clean and fit better before fitting.

How can I detect the polarization direction and what is better to use?

The K&F CONCEPT polarizing film is a complete piece, and the horizontal and vertical directions are 0° and 90° exactly. You just need to stick the sticker and confirm the appropriate angle.

Does the polarizing film have double-sided adhesive or non-adhesive sides? How can you say?

The adhesive surface of the polarizing film is an adhesive surface and the touching surface is a non-adhesive surface. On the polarizing film, the side with the "red logo" is glued, the side with the "blue logo" is not glued and equipped with text instructions.

... 1/2

Log Into Your Account

Login

Register Account

Polarized Film 300*200mmX2, with a film scraper, four bags of dry and wet cloth alcohol bags, with packaging

Multiple payment options:

Quality Guarantee

No Reason Return

Multiple payment options:

Quality Guarantee

No Reason Return