K&F Concept M35111 Pentax K/M/A/FA/DA Lenses to Fuji X Lens Mount Adapter

Application:

• Manual adapter without electronic contacts, doesn't support autofocus/auto diaphragm.
• Adapting APS-frame lens to full-frame camera, it may generate vignetting, some cameras could correct it by adjust APSC.
• Adapting full-frame lens to APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on M4/3 camera.
• Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.

Suitable for:

• Lens: Pentax K DA A Mount Lens
• Camera: Fujifilm X-series Mirrorless Camera
• Properly installed when you rotate about 90 degrees and hear a light "click".
• Please screw the lens adapter lightly and skillfully, needn't too much force.

Infinity focus position:

The position of the infinity mark [∞] of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

Note: 'No Lens Attached' - Warning Message Appears

The camera needs to be set to function without an E-Mount lens attached. You can do this by changing the following camera setting: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location of this option may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.

See All Description

Reviews (98)

Overall Rating 4.8

All Reviews
Image
All Star
- All Star
- 5 Star
- 4 Star
- 3 Star
- 2 Star
- 1 Star

Sort by: Most Recent
- Most Recent
- Top Rating

Valerio Pinna

great product

Excellent product in terms of materials and functionality. It's fine with G lenses too, and that's a great option, even though there are few aperture settings and you're basically always using everything open or closed. The mount is suitable for the Fuji XT1 side as well as for G and AI lenses.

07/06/2023

David Passoni

great product

I bought it because I have Nikon G lenses. The product turned out to be very good. The membrane ring is a bit short, but can be used without any problems. Excellent workmanship, feels solid and easily attaches to both the Fuji on one side and the Nikon lens on the other. Highly Recommended!

06/06/2023

Miguel Esteves

Turn your Nikon lens into a FujiFilm camera

bought a FujiFilm camera. It's difficult to buy lenses. I bought an adapter to use a Nikon lens. It has an aperture ring, so I shoot in A mode. Of course, it can also be used in S mode. I don't use M mode. It is very helpful when it is difficult to buy real lenses. Thanks very much.

05/06/2023

gyong

product as described

I used this adapter with a Fuji XM1 and a Nikon 50mm lens. I had no problem connecting the adapter to the camera and the lens to the adapter. It is possible to adjust the opening of the membrane. Excellent value for money.

04/06/2023

bent72

Functional enough.

The item exceeds my wildest expectations. I tried it out on my x-t10 with a Nikon 35mm 1.8g and a 11-16mm Tokina (always Nikon attachment of course) and I was pleasantly surprised at the sharpness and ease of use of the aperture ring. Obviously, it is suitable for those who have no problem doing it manually. I recommend buying

03/06/2023

Giacomo Maccario

Great

Nikkor lens adapter on a Fuji X body, works very well, it's a tight fit and the aperture ring is pretty functional. Obviously, all automatisms have been lost, i.e. only manual fire and manual diaphragm adjustment. For the price it's a great product.

02/06/2023

Flavio C.

Product conforming to the specified characteristics

Product conforming to the characteristics indicated on the site. The device allows you to connect Nikon lenses to a Fuji with an X-mount connector. The mounted lenses lose all communication with the camera body, so you have to work manually. The adapter ring has no breaks or other defects. Excellent value for money

01/06/2023

Carl Brown

Five stars

HERE ARE THE PHOTOS YOU REQUESTED. I HAVE PROBLEMS ADJUSTING IT

31/05/2023

base

Very satisfied

great product, cheap and well made. It works perfectly. If you have lenses (pre 1977 Nikon in my case), calendar dates but very current quality as in my case...then this product is for you. On the other hand, if you have more modern lenses than where you don't want to lose data transfer between the lens and the camera, then you need a different adapter.

30/05/2023

Samuele

great product

I'm really very happy with the purchase, this adapter is amazing, the membrane ring is very fluid. The good thing is that the system for opening the aperture works perfectly with Nikkor lenses, Nikon G, Tamron (Nikon mount), Sigma (Nikon mount), something I didn't find in my old adapters (they only worked with Nikon brand lenses). Besides the excellent functionality, it is also easy on the eye. It's not very heavy, but not too light either, suggesting the use of "full" materials.

29/05/2023

... 1/10

FAQs

There are no faqs for this product.

Video

How do you find the right size of lens adapter?

... 1/1

Log Into Your Account

Login

Register Account

Pentax K/M/A/FA/DA Lenses to Fuji X Lens Mount Adapter K&F Concept M35111 Lens Adapter

Multiple payment options:

Quality Guarantee

No Reason Return

Multiple payment options:

Quality Guarantee

No Reason Return